“ethereum mining config”

“ethereum mining config”

Hi, ethereum is going to Proof of stake with Casper some time in the neat future which means that you can no longer mine it. So if you have a mining contract and ethereum goes Casper, you cannot continue to mine ether and can only mine other coins. That is a risk you have to take with a Mining contract.
If you believe in the Ethereum concept (despite the failure of the DAO and doubts regarding the viability of Ethereum’s approach), you can support and gain voice in the Ethereum network through mining.
You must be new, but if Eth was to crash or go PoS there would be multiple no profitable cryptocurrencies to mine. Do your research, the only reason they are profitable is because of the horde is on ETH. HA noobs….they think they know everything.
The Service Provider does not guarantee or warrant the profitability of the Services at any time. The Customer acknowledges that it has no claim against Service Provider for any specific amounts of Coins on the basis of this Agreement and Service Provider does not guarantee or warrant any such output or any value thereof. Also, Customer acknowledges that the exchange risk of mined Coins depends on the actual price compared to any given fiat/cryptocurrency (the above called “Market Price Volatility”).
Let’s also hold the price of Ethereum static. By removing any profitability from the appreciation of Ethereum from the equation, we’ll be able to correlate the actual rates of return exclusively with hardware, electricity, and any other costs associated with running a mining rig.
Finally the mining contracts are back. It’s harder and harder to find mining contract and the Genesis Mining ones are the last decent ones around. Most of them will never payback. I’m using Genesis for 1 year right now and satisfied.
What I will do is use Tonga Bios Reader to make a custom bios to underclock the core and see if the hashrate changes. The 380 I have in my Windows desktop has faster timings (Samsung RAM) than the cards in my Linux rig and therefore hashes at 22Mhs instead of 21. Because of that, I’ll try underclocking it to 880Mhz instead of 840 (22/21 * 840).
Cloud mining is very profitable and i highly suggest it everyone doing so. I do cloud investing since 1 1/2 years now, on many platforms. Mainly I use Hash Flare because it has given me the greatest returns for my deposits. On my 2 Bitcoin investment I get roughly about 0.4 BTC/month and I don’t have to hold onto them forever like on many other platforms! I choose the standard duration of 1 year and I get the results directly into my wallet!
Thanks for the great guide. As a 72 year old, trying to figure things out isn’t always easy. I tried to ask this question on Bitcoin forum for Claytons mining software, but can’t figure out how to post the question in the right place. I have set everything up as you said and am mining Ether at 1600Mh/s, but I am apparently mining Decred as well at 1550Mh/s because the batch file from the Clayton miner has in the batch. Here is the batch file: setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100… Read more »
The most energy efficient GPUs around come from Nvidia. Unfortunately, Nvidia GPUs aren’t quite as good at solving cryptographic hashes as AMD hardware. More or less, if you want energy efficiency (without paying a fortune for a 1070 or 1080), your only option is an AMD graphics card. The most energy efficient of these is the AMD Radeon RX 460 or RX 470 (or the pricier RX 560 and RX 570). The RX 470 pulls around 145 watts, with the recommended power supply for it producing around 350 total watts. The RX 460 on the other hand, uses a total of 75 watts. That makes it easier to deploy on single-card mining rigs.
Genesis-Mining: I’ve never used genesis mining because their price is just way to high and its not profitable at all at the current bitcoin price of $18,500 – you better stick with the above listed one.
Yes, but if you’re getting your profit from the increased market price for the crypto, wouldn’t make more sense to just invest the total amount into the crypto itself? Otherwise you would be spending a good amount for electricity + hardware and would have to reach ROI before actually making money.
But, here is a good trick that keeps me going – When I mine Ethereum I do not sell it immediately I wait till the prices of Ethereum has gone up. By this way, my return of investment is met very early.
However it must also be kept in mind that most professional miners would never mine with a single GPU. They create ‘rigs’ with multiple GPUs running together. Most commonly used rigs are 6-GPU Ethereum Mining Rigs and 8-GPU Ethereum Mining Rigs. On many occasions multiple such rigs are used together. We will discuss rigs in depth in a later chapter.
If a quieter and exceptionally cooler home and/or work place is paramount, then purchasing components/equipment that usually requires elaborate cooling and ventilation systems, can prove a deciding factor. The noise can prove excruciating over time, especially you are mining close to a place of work. Electronic dust is a problem too, for breathing as well as for the wear and tear of other appliances/parts.
Note 2: If you were just testing this guide with the free micro instance you now reached a dead end, in fact you will read this message “modprobe: ERROR: could not insert ‘nvidia’: No such device” The system is telling you that the gpu, an nvidia graphic card, is missing. So, start over the guide and get the g2.8xlarge instance before proceeding any further.
AS THE bitcoin price continues to fall, sceptics have started to wonder what will happen to the industry underpinning this digital “crypto-currency”. Around the world, hundreds of thousands of specialised computers have been built to create (or “mine”) bitcoins and, in the process, validate transactions and protect the system. How does bitcoin mining work?
Im leaving this review not as a slant on this site but to let you know that the calculator may need updating, Ive got 11.7TH/s and get daily payouts of 0.0021 to 0.0029 where as your calculator says 10 TH/s will give me daily pay outs of 0.003386 which is quite a big difference
Mining is also the mechanism used to introduce Bitcoins into the system: Miners are paid any transaction fees as well as a “subsidy” of newly created coins. This both serves the purpose of disseminating new coins in a decentralized manner as well as motivating people to provide security for the system.
XFX R9 390X is a high-performing graphics process. It uses mining software Ethminer CUDA and based on the ethash algorithm. It has mining power of 27.5 Mh/s and it is available at Amazon at price $$$.
We’re specifically mining on an MSI Z270 XPOWER Gaming Titanium motherboard powered by an Intel Core i5-7600K quad-core processor and 16GB of Corsair Vengeance 2666MHz RAM. It’s more muscle than any miner needs and will surely gobble up a bit more power while mining than is desired. But it’s the simplest of systems we have on hand that’s ready to mine 24/7. CPU horsepower is much less important in a mining rig, so low-power CPUs are preferable at this time.
Nvidia GPU’s:  To get the latest Nvidia GeForce drivers go to https://www.geforce.com/drivers and then enter in your card info and click “Start Search” and then download the current version from the results.  
The value of Ether currently stands at around $950 and it is a more or less profitable venture for beginners as well as experienced miners. Ethereum also runs on a proof-of-protocol like Bitcoin and the following need to be taken into account when calculating the profitability of mining Ether.
Bought a 2-year DASH X11 Contract with Genesis about 2 months ago and I am very happy with it. It has already almost paid 50% of the initial cost. Looks like these contracts have sold out now but I would definitely buy again.
The Total Profits view predicts what your overall profitability will be in the future. This is calculated by taking your current profits and adding them to each following months profits while factoring in the changing difficulty (diff change), the diff change factor can be disabled. This view assumes the price of the coin will stay the same. If you wish to account for a changing price (ie if you think the price will rise in the future), switch to the “Coins Generated” view.
Seems that crypto currencies are a hot thing on this blog during this Summer, though it was just recent, not even a month ago, when I decided to diversify my investment portfolio and allocate up to 5% space in it…

Leave a Reply

Your email address will not be published. Required fields are marked *