“ethereum mining cuda best”

“ethereum mining cuda best”

2. What PSU valtage do you recoment since both the logic that you used with the 20% rule and this calculator by OuterVision (https://outervision.com/power-supply-calculator) (the same as the CoolerMaster one) is suggesting that you buy “bigger” PSU? (GPUs use a variable of 150, meaning around 1000 and then adding the processor and the 20% rule getting us at 1600W PSU or 2x650W PSUs) And since we are the the PSU topic – what brands do you recommend and do you recommend getting 2 PSU in the first place?
This top is fairly thin as AMD options are either impossible to find in stock at this time, or come with artificially inflated prices that make them unprofitable. The RX480 and RX580 families have hash rates between 250 and 300 MH/s, which is not that impressive given their scarce availability. Similar hash rates can be achieved by NVIDIA’s GTX 1060 models, which tend to cost less, are widely available and are less power hungry, so it turns out that, overall, ZEC mining is a win for the green side.
Once your node is part of the Ethereum network, and you already have your client downloaded, it is advisable to install Ethminer, which will help your node carry out the duty of securing the Ethereum network for you.
When choosing a GPU for mining, you want a good balance of low power usage (assuming you pay for electricity) and great hash rates. I’ve listed my recommendations below in the order of what I would buy if I was building a rig today.
Dwarfpool was once the biggest ethereum mining pool, but its hash rate has since dropped to approximately 4.3%. Just like the first and second pools above, they also ask for 1% as the block fee on your rewards.
A close second choice for a mining GPU if the Nvidia is hard to find or out of stock, would be the AMD Rx 580 and AMD Rx 570.  The Rx 580 does 29Mh/s and the Rx 570 does 27Mh/s. All mining rig build requirements are the same for either the 1070 or the Rx 580/570. The primary reason I like the GTX 1070 is the lower power usage (100w vs 135w per GPU) when mining. If you want to give your power supply a little extra headroom to run the Rx 580, I’d recommend upgrading to a 1200 watt power supply.
The AMD Radeon RX Vega 56 is one of the best value-packed graphics card on the market right now. Benchmarks prove it runs faster than the Nvidia GTX 1070 and, thanks to the Bitcoin mining craze, it’s also cheaper to boot.  Again, it can be a tricky GPU to track down, and it’s power consumption means it can end up being a pricey GPU to run 24/7 in a mining rig, but it performs very well at mining, so if you can find one, it’s definitely worth considering.
This is the third biggest ethereum mining pool. It has more than 13% of the ethereum hash rates. Furthermore, it has more than 38,000 miners. Besides that, its pool rate charge per reward is also low – 1%.
Form factor: ATX | GPU Support: 19 | Processors supported: 7th and 6th Generation Intel Core i7/i5/i3/Pentium/Celeron (Socket 1151) | Slots: 1 x PCI Express 3.0 x16, 18 x PCI Express 2.0 x1, 2 x DDR4 DIMM
Double click your Bat file to start the miner.  The miner will start, run the setx commands to set those environment variables, initialize each of your GPU’s, build the DAG file on each of your GPU’s and start hashing away.  Let it run for about 20 seconds and then click “s” to have it show your Hashing speed.  You can use that back in the calculator again to determine a more accurate representation of your earnings.   
Even harder to find than the RX 480 is the AMD RX 470. A year ago, this was the absolute best card for mining. With a slight BIOS mod, it can do 29Mh/s while pulling 140 watts. Just like the other AMD cards listed, my favorite model is the AMD Sapphire RX 470 Nitro+ (Model #11256-10-20G).
Note that your Ethereum mining software will treat the HD 7990 as two separate GPUs with 3Gb RAM each, and miners with 2Gb GPUs have recently encountered some problems with the growing DAG file size 2Gb cards stopped working – 13/03/2016.
Ether mining still relies on finding solutions to complex mathematical problems, and processing power is still a key factor, so the more power you have at your disposal, the higher your earnings. Here are your best options:
When choosing a mining pool, it’s important to join one with low fees that brings reliable returns. You should also consider the server location of the pool when deciding which is best for you. The closer your mining rig is to the server, the more efficiently it can mine.
I’ve tried creating a batch script with every iteration of the final line, it does nothing. The CMD prompt appears and then closes within a second. I’ve been at this for HOURS. Any help would be awesome….
Contracts vary from hourly to multiple years. The major factor that is unknown to both parties is the Bitcoin network difficulty and it drastically determines the profitability of the bitcoin cloud hashing contracts.
While you will still be using your GPUs or ASICs, you have the choice to choose between mining in a pool, or by yourself, hence “solo” Pool mining is where you join with a group of other miners and every miner contributes to mining blocks. The difference between this and solo mining is that your payouts are more consistent. Solo mining is hard, especially if you are running a small rig because you will most likely not find a block for a very long time unless you get very lucky. You can use the Coin Warz calculator to estimate how long it will take you to mine a block by yourself. Another benefit of pool mining is that it’s more consistent. You will get your payments consistently, unlike solo mining where it may take a very long time to get your payout. I recommend the Ethermine.org and Nanopool.org pools, each have a large list of crypto-pools to choose from. You can also check if your rig is online here, as well as how much crypto you have mined.
Unfortunately it’s hard to troubleshoot without any error message. Do you ever get problems running graphically intensive applications like games? You could also try downloading a stress testing app for your GPU and seeing how it performs:

Leave a Reply

Your email address will not be published. Required fields are marked *