“ethereum mining gpu pool best”

“ethereum mining gpu pool best”

Time to break-even is calculated by comparing your hardware cost (which you must enter below) to your predicted monthly profits and seeing how long until the initial hardware cost is paid off. The calculator also takes the changing difficulty (diff change) into account. If the network difficulty is increasing quickly, this will greatly increase your break-even time. The diff change can be excluded from the calculation by toggling the “Use Diff Change” switch.
Years ago (spring of 2015) I had mined ETHEREUM (solo) using GETH in UBUNTU 14 and one time the mother board gave me some trouble so I had to change much newer MB ( may be too much newer one). After MB was changed the computer was not posting to C driver any more .Struggled many hours but at last I had to format the HD with about 250 ETH (all gone at present situation)remained inside and reinstalled GETH and in short time I lost all the interest in mining I completely abandoned my miner. At that time ETH was about only $1~2 some times 50 cents so I did not care much and left it alone all this years but I saved the HD in my draw and now it is worth 1/4 of million dollars now. Now I use TESTDISK in UBUNTU 14 and trying to go back to the state before the format to find the ETH. Please help me where I should look for (which folder which file if I can revival them) those accumulated 250 ETH exist. HOW I GET IT BACK.
I’m mining at poolmining.org a small EU based pool that started about 2-3 months ago. Only found 2 ethereum blocks so far all in a single day (crazy variance), but the payout for me was more than satisfactory – I have 2x 1070. The pool has vardiff, PPLNS and a really dedicated pool operator that you can actually talk to through the support forum.
Currently (November 2017) the two best mining groups of Ethereum are: Ethpool(http://ethpool.org) and Ethermine (https://ethermine.org). Together they have more than 27% of the hashrate of the network.
Eobot Review: Claims to be the easiest, cheapest, and best cloud mining solution. Start with as little as $10 using PayPal and choose between any cryptocurrency including Bitcoin, Litecoin, Peercoin, Namecoin, Feathercoin, Dogecoin, NautilusCoin, and Vertcoin.
Install the Software: After choosing your desired mining hardware, the next thing to do is to install the mining software. Make sure that you are connected to the Ethereum network. After installing, your node can now communicate with other nodes.
Both Nanopool and Ethermine can run different software to hash for Ethereum. I recommend running Claymore Dual Miner which allows you to hash for both Ethereum, as well as an alternative currency. This is because Ethereum heavily relies on memory usage while the core processor sits idle. While dual mining, the memory of your video card will hash for Ethereum, and the core processor will hash for Decred or Siacoin as an example.
So, mining Ethereum is getting common these days and it seems like Ethereum is going to be the next BTC. Okay, let’s hope for good. We have been researching how to mine Ethereum and which are going to be the best POOLS to mine ETH.
Before you opt to start mining this wonderful cryptocurrency, you should be convinced that it is the best thing that you want to do. You should analyze all the necessary investments and related information and ensure that you understand them correctly. Things you need to analyze and comprehend well are like the volatility that has characterized this world of cryptocurrency and getting an ROI after a half a year of being in the business.
Each block must have the proof of work of the given difficulty if it is to validated in consensus. The algorithm for validation is called Esthash. It has to do with identifying the nonce input to the result in such a way that it will be below a threshold that is determined by the difficulty. If the outputs are uniform in distribution, then the fact that the time required to find a nonce depends on the difficulty is guaranteed. In this case, simply manipulating the difficulty will allow a miner control how much time is required to find a new block.
We’re specifically mining on an MSI Z270 XPOWER Gaming Titanium motherboard powered by an Intel Core i5-7600K quad-core processor and 16GB of Corsair Vengeance 2666MHz RAM. It’s more muscle than any miner needs and will surely gobble up a bit more power while mining than is desired. But it’s the simplest of systems we have on hand that’s ready to mine 24/7. CPU horsepower is much less important in a mining rig, so low-power CPUs are preferable at this time.
Fans. Liquid cooling requires more thought as it is the GPUs that require the cooling and you will have to purchase the correct GPU liquid cooling add-on, or purchase a GPU with the liquid cooling built in.
Formulas refresh on specific actions. If you are using the formulas method, your data will not update unless you do more common options such as refreshing the entire sheet, or less common options such as downloading a new add-in. This is why I recommend using the GUI so you can have control over refreshing the data
On the whole, your hardware, excluding GPUs, shouldn’t cost you more than $500, and the large part of this will be your PSU. Below is a recommended purchase list from Amazon. The total without the GPUs comes to $472.21. While with 6 RX480s your total cost would be $1702.15 sans shipping costs.
Note that R9s only have 4 GBs of RAM, which means that their performance is rapidly degrading with advancement of epochs, which means that you will be able to resell it later only at a very cheap price (once it’s no longer suitable for mining).
Next on our list is Nanopool (https://nanopool.org). Currently, Nanopool has 40,000 Ethereum miners and represents 15% of the hashrate. Nanopool uses the PPLNS method to calculate payments in the same way as Ethermine. Payments are made several times during the day. Nanopool has servers in Asia, Europe and America.
Experimentation with various GPU selections in the calculator will reveal a card with the best price to performance to power consumption combination (expressed as MH/s per Currency Unit). Keep in mind that AMD cards outperform NVidia for cryptocurrency mining purposes.
If a card you own or plan on buying did not make this list, that does not mean that’s it’s a bad card by any means. This list is purely based on my opinions, as well as the price of the cards and the raw performance numbers. Though there are other cards which are great for mining, such as GTX 1080 Ti or RX Vega 64 (which I did not include due to their high cost), these cards on the list are just my recommendations. Another option for mining is ASICs. ASICs are devices made specifically for mining, and when compared to graphics cards, ASICs perform much better and have a much lower performance to the power draw ratio. The problem with ASICs are that they can only mine on one algorithm, so when the difficulty goes up, or the price of the coin you are mining goes down, you simply can’t swap to another algorithm, you will have to stay with that algorithm. ASICs are primarily used for SHA-256 (Bitcoin) or SCRYPT (Litecoin) algorithms.
 – A standard keyboard, mouse and monitor are needed.  If managing your rig remotely (not covered here in this beginner guide) you will want to get a headless hdmi dummy plug to plug into your rig so it boots into Windows properly for remote access.  
Ethereum is distributed among a public blockchain, much like Bitcoin, but it has a completely different blockchain protocol than Bitcoin. Bitcoin’s blockchain is based on proof of work (PoW), while Ethereum’s blockchain is soon to become based on proof of stake (PoS).
To monitor your rig, you have two options. You can either log in through SSH or look at the generated stats panel. The stats panel has the advantage that it’s a simple web page and you can easily view it from anywhere. SSH poses the advantage, that should you have any issues, you can easily remotely manage the system (as long as you’re happy with Linux command line operations).
If only it was that easy. No one knows whether any cryptocurrency will increase in value — or even be around in a year’s time (though we think the ones outlined in this article will check both of those boxes). None of them are regulated (yet) and only individuals with the highest capacity for risk should get into the cryptocurrency market. That noted, there are significant differences among these three that could be used to form a rational basis for investing in or mining one over another.
PB Mining Review: Claims to operate Bitcoin mining ASIC hardware. When customers buy a bitcoin mining contract then they will begin earning Bitcoins instantly. At Piggyback Mining, they cover the electricity costs and all Bitcoin mining pool fees. The Bitcoin mining contract is 100% insured because they want customers to succeed.
I would like to start mining Ether, but my GPU isn’t the greatest and I don’t really want to spend the money on a dedicated rig. Is mining from my CPU (in a Linux environment) still worth the Ether? Or will I not be able to keep up?
Hard Drive – You’re going to need a hard drive to put the operating system and mining software on. Your standard SSD drive can work. The size of the SSD will depend on what you want to do while you’re mining. If you intend on downloading the entire blockchain, then you need to take into consideration how long that chain will get and shell out a bit more money. If you’re just interested in mining as part of a pool then you can manage just fine with a smaller SSD drive.
1) I’m running ethOS at the moment, but I’m fairly certain I used that driver, however, I’ll check at a later date. I will update the article to mention that you’ll need to find out the best driver for you as you’re correct it does vary from GPU to GPU.
Ethereum is quite difficult to get mining on windows – although with a bit of help and following the tutorial below you can get it up and running and start your own ethereum mining project in 15 mins. We’re going to show you how to start mining Ethereum on your GPU and CPU with Windows 64 bit in this guide. You will need to download two programs and need to have a decent GPU with more than 1GB of memory to get the most bang for your buck in terms of mining as Ethereum works on a memory hard hashing technique which GPU’s are best at.
Recently Nano Pool is acting weird, and hashrate drops for some reason, It is happening across at all rigs. Can you please let me know which Pool are best and having accurate hashrate reports and puncture payout.
Please advice if the second GPU (from previous post, GIGABYTE GeForce GTX 1070 G1 GAMING 8GB (GV-N1070G1 GAMING-8GD) would be a right choice for the rig or there are some differences that I may experience in overclocking/drivers, e.t.c.. Thanks in advance,
Dwarfpool was once the biggest ethereum mining pool, but its hash rate has since dropped to approximately 4.3%. Just like the first and second pools above, they also ask for 1% as the block fee your rewards.
Joining the Ethereum mining pool is the next step after you have obtained the proper Ethereum mining hardware. The adequate and reliable mining pool will aid you in getting more frequent payouts. This is in comparison to getting paid only when you solve an Ether block.
While it is a fact that mining this cryptocurrency is a lucrative affair, its profitability does not come even near some currency platforms such as Litecoin Mining and Dash Mining. If your main idea of mining Ethereum is to acquire the cryptocurrency, then it would be just wise to purchase it. Mining hardware is not that cheap, and it wouldn’t be easy to turn a profit unless you are mining on a large scale.

Leave a Reply

Your email address will not be published. Required fields are marked *