“ethereum mining profitable 2017”

“ethereum mining profitable 2017”

I’ve had success both ways and so if you run into an issue with one method delete the drivers and try the other method.  And if you do need to remove your drivers use the DDU (Display Driver Uninstaller) program from Guru3d.com to remove everything cleanly and then start over.  
This article didn’t address the mining difficulty of Ethereum. At this point, is not a good idea to mine ethereum unless people have hash rates in the GH/s or at least MH/s. It’s better to mine other alt coins such as: XMR, LTC, and many others. Overstock.com will now accept 40+ different Altcoins as form of payment. Won’t be long before other companies do as well.
This simple Ethereum mining calculator will allow you to determine how much you can profit from a certain Ethereum miner. It takes into account all relevant costs such as hardware, electricity and fees. See below for detailed instructions on how to use it.
4) RAM – or Random Access Memory – this is a basic component in any computer is basically a scratchpad for jotting down calculations and recalling information quickly in a computer. 4GB should do the job.
I had bitcoin mining running for like 6 weeks and decided to get some Litecoin mining as well. Got myself 80 MH/s which seems to deliver like 0.4 LTC daily. Not bad at all! Support @ Genesis is great; they answer quickly and the answers are satisfying. Keep up the good work!
Radeon R9 HD 7990 is yet another highly sought after Graphic Processing Unit by Ethereum miners. It enjoyed the highest popularity ratings prior to introduction of Radeon R9 295X2. In spite of this many seasoned miners continue to use Radeon R9 HD 7990 in spite of its higher price tag in relation to its hash power that stands at 36 MH/s. Radeon R9 HD 7990 delivers greater power efficiency at 300 Watts. Radeon R9 HD 7990 sports 6GB HDD45 RAM. Radeon R9 HD 7990 is undoubtedly the second most ideal GPU for Ethereum mining after R9 295X2.
A fixed maintenance fee is deducted from all Open-Ended contracts for as long as they are profitable. Current maintenance fee: USD 0.00028 per GH/s per day. Be aware that the fee is fixed in USD, but deducted from the daily payouts in BTC. Please refer to the contract for further details.
When all three are connected my screen goes all wonky. Nothing really works. When just the two extenders are attached everything works fine. When just the single riser is attached everything works fine. But I can’t get all three to work at once.
The hashrate keeps falling quite fast and a flood of RX cards may hit the market when they’re no longer usable for Ethereum mining. Those who want to mine other altcoins may be possible to pick up some bargains.
it will go down even more, not only because you can mine less and less but also the value of the coin is sinking and sinking (from 400$ per eth down to 200 and keeps sinking) and electricity cost is rising in many countries
not if ethereum is your only plan and you have to pay full price on cards. i can buy cards as business expense, so no tax for me. i can write them off, so they’re again half in price. i bought some to a decent low price, (gtx 1070 for 400€) so total expenses I need for break even is 180€ per card. this should/could work out. and if not, I can sell the cards off for half the price and still be able to break even (without any cent mined), although I would rather stick to it and mine for the only real reason to mine: support an idea. be it a crypto currency or something like folding at home.
There are no dedicated ASICs available in the market till now for mining Ethereum. At the same time, since Ethereum intends to make a conscious switch from Proof-of-Work to Proof-of-Stake, purchasing an ASIC device may be a smart choice at the moment. Under the POW network, miners essentially verify transactions on the Ether blockchain and are granted Ether as a reward. Under the POS system, this authentication method will be run by individuals who possess Ether in accord with the amount you own. It is unclear as to when the transition to the POS algorithm will take place. However, it seems like the inevitable culmination of the Ethereum platform. In case you have already bought a mining rig, you can mine other cryptocurrencies like Monero and Zcash with it.
All of this made me consider the idea of building my own GPU mining rigs for sale. Hopefully, this could help more people to get involved in cryptocurrency mining. Also, it is way easier for me to work on the rigs on my own and then deliver you a fully-functional product rather than doing the magic remotely.
Well, since I started mining Ether, I went from over 20 ether a day like in Dec 2015 to today it’s saying 5.92, on the same exact setup, actually I have slightly more Hashes because of toying with settings and whatnot along the way. I only experience less Ether week to week. I really wouldn’t advice anyone to jump in now, unless they plan to use the computer as a gaming rig later, most likely in a month or 2 the profits will be back in line with the 2015 crypto mining world, which is not much more than cost for most people.
MinerGate allows users to mine coins through a smart-mining option (auto switches to most profitable coin) or choosing your favorite cryptocurrency manually. Merged-mining is available for FCN and MCN, allowing you to mine two currencies at once without the loss of hashrate for the main coin.
IMPORTANT: The following info is taken from the manufacturers and does not take into account and custom configuration such as overclocking, undervolting and BIOS modifications. Actual results vary depending on your customization. AMD cards allow for greater customization while Nvidia cards are locked to certain configurations.
The other advantage is that you don’t have to listen to the noise that it creates. Adding all of this together it would seem pretty logical to opt for a mining contract unless the joy of mining was for the joy of mining itself. Although you might just get a smaller slice of profitability by doing it for yourself – would it be worth it – we don’t think so…
Also I disagree that trusting the miners is foolish, yes 99% are in it for the profits but there is a balance between the difficulty, price, and gross hash power, and it seems to be working. Even if difficulty doubles (depending on your electricity) it still has a 12 to 18 month payback without price inflation.
The mining demand has driven prices well above their normal retail price, but when it comes to a relatively cheap videocards with a solid performance currently available on the market, AMD’s R9 390(X) seems to beat other cards. Even though it tends to be a relatively old card (the R9 series was introduced back in 2015), it has aged far more gracefully than the more recent RX 400 / 500 series (which launched in 2016 and 2017, respectively).
It’s comments like this that have me scratching my head. I assume you’re solely talking about ETH mining drying up, considering this is /r/EtherMining, but why make it seem like the end of days is coming? If ETH dries up, yes it would suck, but it would take maybe an hour to download, reconfigure and re-aim your processing power at a different coin.
Solo mining might have the best payout of the three methods if you have the financial power to invest in several GPUs and pay mammoth electricity bills. To carry out solo mining successfully, you need to hit at least 100 mega hashes per second and this hash rate will increase as difficulty rises. However, you get all the rewards; they include payment for uncles on top of your earnings.
1x Power Supply –  1000 Watt PSU – The key here is to have an efficient power supply that will save you over the long run in electricity costs. Look for Gold or Platinum rated (as opposed to silver or bronze). This is the industry standard for rating the efficiency of a computer’s power supply unit (PSU). If the model linked above is unavailable, I’d also recommend this model and this model.
As mentioned above, the risk of fraud and mismanagement is all too common in the cloud mining space. Investors should only invest in cloud mining if they are comfortable with these risks – as the saying goes, never invest more than you are willing to lose.
For powering 6 GPUs it’s important to buy a 1200W power supply with Platinum connectors. Using anything lower than a Platinum connector will cause a loss of energy during use; which will ultimately factor into your bottom line. If you’re planning on using less than 6 GPUs you can go with a less powerful power supply.
I’m really happy about it, sometimes payment are a little bit late but I understand. I use few bitcoins too and transactions are very long and for an short time transaction very expensive. U are doing a good job, just Continue ! Go Genesis
6x USB Riser Cables –  USB Riser Cables – These are to connect the 6 graphics cards to the motherboard and allow spacing between cards for heat dissipation. These are necessary when building a rig with this many GPU’s.
** Warning: this has been tested on the Frontier test-net and has just recently undergone testing on the Frontier live-net, which has just been launched. A notice on costs: you are going to spend about 2.60 USD / hour for a g2.8 instance so keep this in mind, if you want to proceed **

Leave a Reply

Your email address will not be published. Required fields are marked *