“ethereum mining rig earnings best”

“ethereum mining rig earnings best”

This video card is the older brother to the RX 580. For some cryptocurrencies, the AMD RX 480 actually outperforms the RX 580, but I put it at number 3 on the list since it is discontinued and somewhat difficult to find other than on the used market. My favorite model, of course, is the AMD Sapphire RX 480 Nitro+ (Model #11260-20-20G). If you can find these at a decent price point (again, always worth checking eBay), they are a great value.
Your hashrate may increase from 10% to over 31 MH/s by boosting the stock speed via an overclocking utility, such as Afterburner, which is the world’s most recognized and widely used graphics card overclocking utility which gives you full control of your graphics cards.
Ethereum’s Ethash algorithm is just one of several algorithms intended for optimal mining on GPUs and is used to secure the network and empowers end users to have full control of their money. This algorithm was designed to prevent the development of dedicated ASICs to mine it. SHA-256 and Scrypt are extremely compute-hungry, consequently rendering ASICs more efficient than our graphics cards (even more so than CPUs). On the other hand, Ethash is rather dependent on memory performance (timing, frequency, and bandwidth). Generally speaking, a GPU is good for mining all GPU-mineable cryptocurrency (including Ethereum Classic (ETC), Zcash (ZEC), Monero (XMR), and Vertcoin (VTC)), which gives GPU miners enviable flexibility, in order to be able to switch between over 40 coins that are based on their current profitability.
Sapphire is a Graphics card producer that can be used in mining alternative crypto currencies such as Ethereum and Litecoin. See all products Sapphire has to offer and check out the profitability and returns for using them to mine ether.
OK so this sounds like a problem with your graphics card driver. Are you using the latest driver for your card? If you’re using a standard Windows driver, this could be the cause of your problem. So I suggest you check out the relevant Nvidia or AMD website and get the latest GPU drivers for your machine.
MiningFit is a Norway based mining contract provider. They offer a range of contracts from 5 TH/s to 500 TH/s having chosen several optimal locations to house their equipment – where there is cheap electricity and low temperatures to reduce the need for cooling.
It has a global mining network that has DDOS protected servers located in the US East, US West, EU (France) and Singapore. Just like the above mentioned Ethreum mining pools it also has an efficient mining engine and low uncle rates.
Today we are going to talk about Ethereum Mining pools.  Ethereum is a public, open source platform built on a blockchain technology. Ethereum is a public computing platform that comes with a specific feature or function called Smart Contract. Ethereum makes use of a decentralized virtual machine known as the Ethereum Virtual Machine (EVM). This machine executes scripts with use of nodes, which happens to be public and international. Using Ethereum, a cryptocurrency token known as ether is provided. This token can be transferred to several accounts. It is used to reward nodes who performed in certain computations.
On the whole, your hardware, excluding GPUs, shouldn’t cost you more than $500, and the large part of this will be your PSU. Below is a recommended purchase list from Amazon. The total without the GPUs comes to $472.21. While with 6 RX480s your total cost would be $1702.15 sans shipping costs.
The main part of the mining hardware is the graphics processing unit (GPU). Here is a link to a site that allows you to compare the different GPUs – http://www.mininghwcomparison.com/list/index.php?brand=both . Type “Ethereum” in the filter.
Step 4: Command Prompt is now open – and can look terrifying to people who aren’t familiar with it. The Command Prompt box usually has C:\Users\Username> showing in it – where Username is your username – so if you log into your computer with the username cryptocompare then the command prompt box will open with C:\Users\cryptocompare>. You need to tell the computer to look in another place Type cd / into the newly opened command prompt. You should now see “C:\>”, You have just used the cd command or “change directory” command to make command prompt look at the C:/ drive.
For the best GPU for mining ethereum, perhaps the Sapphire Radeon NITRO+ Rx 480 8GB Graphics Card should be your next graphics card. You can experience the revolutionary FinFET 14 nm technology within the Sapphire Nitro+ without worrying about consuming a lot of energy, it overheating, or it being too noisy. With this card, you can expect terrific performance per watt results because the numerous custom AMD enhancements this card features, all of which have been applied to a tiny Polaris chip.
The motherboard is the most important aspect to any mining rig. The reason for this is that it needs to be able to support all of your GPUs. If you only plan on having one or two, then it’s not so important. However, most people will aim to maximize and have 6 GPUs in a single rig. There are very few motherboards that will support the running of 6 GPUs. The big advantage with mining is that you can run the GPUs from x1 PCIe slots, so you don’t need to find a motherboard with 6 x16 PCIe slots.
That example highlights the advantage of simply buying cryptocurrencies and storing them for later, but these currencies can also be mined, which can generate you a higher profit on the long run, as you just need to invest once in the hardware, and then watch it work towards making you rich.
Another risk, though small, is that if you decide to mine on the ETHash algorithm you have to make sure you have enough VRAM (Video Random Access Memory) on the graphics card, as the networks DAG (Directed Acrylic Graph) will be stored on the VRAM. So if you do not have a large enough VRAM size on your GPU you will not be able to mine that coin. At the moment, Ethereum’s DAG file size is 2.1 GB meaning that you will have to mine on a card with more than 2 GBs of VRAM. You can check the DAG size for some popular coins using this website.
Again, you will need the bare minimum, 4GB will do. I chose to go with 8GB just in case. Also, if you’re going to be doing solo mining, it’s a good idea to have as much as possible at the start as this will make syncing the block chain a lot faster. Of course, once that’s finished, you can remove the excess.
Here is our formula for working out monthly profit: M – W = P. M is the value of the amount of coins you mine per day, this can be found through sites like coingecko where it will tell you how much your crypto is worth. W is the amount you will be spending on kWh every month. This will then give you P which is your monthly profit. You can also find your daily profit by inputting your daily mined crypto into M and daily power usage in for W, the same can be done for weekly calculations. To find your real profit however, you first need to pay back the first investment into your mining rig. To find out how long this will take, you must use this formula: C / P = D, where C is the cost of your mining computer, P is the same as before (monthly profit), and D is the time it will take to pay back your computer, either in months, weeks or days. This depends on what you use for the first calculation. After you pay back the rig, every cent you make will go towards your total profit.
The takeaway here is that hashrate has followed (with some appreciable lag) the ETH price explosion, which began in late January 2016, saw some downturn in late 2016, but then exploded again in Q2 2017.  What an amazing bull run! Up to almost $400 USD from just $10 USD in a few short months.
I’m a little confuse, on 2.3 you said “two scary looking boxes” but you only told me to open one. So the question is, it is necessary to have Geth running to mining from a pool? Or I just need a wallet address and the Ethminer?
But, here is a good trick that keeps me going – When I mine Ethereum I do not sell it immediately I wait till the prices of Ethereum has gone up. By this way, my return of investment is met very early.
If you want a low cost of entry into the world of mining, then the AMD is perfect for you because their cards to be cheaper and offer more support and potential for modification. On the other hand, Nvidia Cards have better thermal management and overclocking support within Windows.
Ethereum mining is difficult on the Windows. Nonetheless, you can mine Ether using a GPU or a CPU device with Windows 64 bit. By running your CPU device, you can generate 0.15 Mega Hashes. On the other hand, using a decent GPU miner with sufficient storage, you can reach the 25 Mega Hashes mark. Thus, with regards to the overall efficiency, and after considering the total electricity charges, a GPU is definitely worth a purchase even if its cost is $200.
I’ve received several questions about configuring drivers, adjusting overclocking/undervolting settings and configuring the mining software. Below, you’ll find a very brief 5 min video showing how to implement these 3 important steps in the mining rig configuration process.
PandaMiner is a cryptocurrency mining manufacturer focused on graphics card integrated miners. The GPU-based miners allow users to miner various cryptocurrencies like Ether, Zcash and many others. These GPU integrated miners are assembled with high configuration graphics cards and a tightly compatible case, professional rack and other optimized accessories for the highest mining efficiency.
It has become the new standard in Ethereum mining and with the huge price explosion the demand for these cards have far outpaced supply and created an extreme GPU shortage, resulting in much higher GPU prices.  That said, if you shop carefully, set up auto-notifications/alerts and have a little luck you can get some of the AMD RX series cards.
Yes you won’t get everything initially. I wanted to sell this program first for little donation but over time it started to look like a worse idea. The main issue was that noone want to buy some random program which claims to do xy.
To start mining with your GPU, key in ‘ethminer –G’ followed by the enter key. This will initiate the mining process after building the DAG ((Directed Acyclic Graph), which is a large file stored in the RAM of your GPU for the purpose of making it ASIC (Application Specific Integrated Circuits) resistant. Ensure that there is sufficient space on your hard drive before getting to this point.
Change your password: Use the below commands to change both the root, and main ethOS user passwords. This is important especially if you’re planning to remotely access through SSH. Otherwise, your machine could be maliciously taken over.
To monitor your rig, you have two options. You can either log in through SSH or look at the generated stats panel. The stats panel has the advantage that it’s a simple web page and you can easily view it from anywhere. SSH poses the advantage, that should you have any issues, you can easily remotely manage the system (as long as you’re happy with Linux command line operations).

Leave a Reply

Your email address will not be published. Required fields are marked *