“ethereum gpu mining guide best”

“ethereum gpu mining guide best”

2. PPLNS stands for Pay Per Last n Shares. This is more of a variable number based on the luck of the pool. So, if the pool gets lucky and mines more blocks in a given timeframe, you’ll get a bigger payout. Of course, if the mining pool is unlucky, you’ll get less of a payout. If you’re mining 24/7 and don’t drop connection frequently, you’ll get roughly 4% more ETH using PPLNS vs PPS for Ethereum mining.
Currently you’ll need at least 3GB of dedicated video memory (VRAM) to mine Ethereum, and this VRAM requirement is expected to grow to 4GB in 2018. It’s important to note that if you are planning to mine with a GPU that doesn’t have at least 3GB of VRAM, you won’t be able to!
The rest of this guide focuses on the hardware side. For further help setting up an Ethereum wallet, join a pool, and use your miner. These steps are detailed in our beginner’s guide to mining Ethereum.
The Titan Xp can be overclocked to 42 MH/s, but it will consume 300 W when pushed that hard. It achieves an excellent hash rate without too much expenditure of power. Meanwhile, its top-end AMD rival, the RX Vega 64, achieves a very similar performance for about half the price.
If a card you own or plan on buying did not make this list, that does not mean that’s it’s a bad card by any means. This list is purely based on my opinions, as well as the price of the cards and the raw performance numbers. Though there are other cards which are great for mining, such as GTX 1080 Ti or RX Vega 64 (which I did not include due to their high cost), these cards on the list are just my recommendations. Another option for mining is ASICs. ASICs are devices made specifically for mining, and when compared to graphics cards, ASICs perform much better and have a much lower performance to the power draw ratio. The problem with ASICs are that they can only mine on one algorithm, so when the difficulty goes up, or the price of the coin you are mining goes down, you simply can’t swap to another algorithm, you will have to stay with that algorithm. ASICs are primarily used for SHA-256 (Bitcoin) or SCRYPT (Litecoin) algorithms.
I’ve been using this alternative as a safe and cost-efficient way to mine Ether, without breaking the bank and setting up a rig (Most of the time there are other costs involved like electricity, hardware failure, etc.).
Once you successfully mine a block and it is included in the blockchain, you will earn ether as well as gas set for that block, which is the computational cost of mining that block. As a miner, you’ll always target blocks with more gas allocated because it is more profitable. The amount of ether you get for gas is computed as gas used multiplied by gas price.
Troubleshooting tip:  Some miners have had success installing all GPU’s at once and then installing the drivers.  Others prefer to install only one card, install the drivers, shut down the system and then install the rest of the GPU’s and then just let them all be recognized by Windows (you’ll feel the system lagging, some flickers, or brief black screens while each card is detected by Windows).  
If you want a local address, then download the Mist wallet, let the blockchain sync and create your account there. Alternatively, download Geth, and save it to a folder such as C:Ether. Then type “geth account new“. Whichever method you go for, make sure that you save your password with a secure software such as KeePass.
For this first update to our exploration of Ethereum mining performance, we’re adding six graphics cards in the entry-level and mid-range categories. We’re also preparing a second update that’ll include high-end GPUs. Beyond our original line-up, the list of contenders now also includes:
CoinCentral’s owners, writers, and/or guest post authors may or may not have a vested interest in any of the above projects and businesses. None of the content on CoinCentral is investment advice nor is it a replacement for advice from a certified financial planner.
well Andy, if you do that your wasting time …1080 ti earning is only 20 percent less than 3 gtx 1060. now you want to have like 100 gpus running … than 1080ti all the way in nvidia. So serious miner go for 1070 or 1080 ti. Any lower is waste of resource like space,riser cable,psu,motherboard,etc. You need count them also in when considering ROI. Not just ROI of the Card. even though with gtx 1060 profit percent is high ,its just 3.5 -4$ per day. with ti you roll at 10-12 $ a day. market favorable that even 15$.
In general, lists are not well suited for Q&A sites. In addition, the quest for good mining pools is way too subjective. Also this thread keeps generating noise from people trying to promote their own pools. I will put this on hold for now. – default May 3 ’16 at 8:43
MiningFit is a Norway based mining contract provider. They offer a range of contracts from 5 TH/s to 500 TH/s having chosen several optimal locations to house their equipment – where there is cheap electricity and low temperatures to reduce the need for cooling.
Think about it. It does not sound like much, but it is. If you have a friend that just invests 1 Bitcoin, you instantly get 0.10 Bitcoin. Your friend probably earns much more % on his 1 Bitcoin, depending on the contract he choosed.
Hello, I was wondering if you could help me with a bios modification question. I have a rig running mostly rx470 mining editions, are these cards already maxed out when it comes to tweeking their bios? Im asking becuase i have tryed to tweek them in the past and run into issues and a loss in hash rate…
When it comes to picking GPUs, you want the select the best bang for the buck.  You’re looking for something with high hash rate, low cost, and low power usage.  You can start with as little as 1 GPU or as much as 7 GPUs within one rig.  Normally you see 5-6 in a mining rig as 7 is incredibly hard to make stable.
6x USB Riser Cables –  USB Riser Cables – These are to connect the 6 graphics cards to the motherboard and allow spacing between cards for heat dissipation. These are necessary when building a rig with this many GPU’s.
Before you decide that you’d like to start mining for ethereum, you first need to decide if it is going to be profitable for you. At first glance, it’s going to be incredibly easy, but you should know that mining is going to be a lot like trading stocks.
There have been a tremendous amount of Bitcoin cloud mining scams like the possible $500,000 Bitcoin cloud mining ponzi scheme that was uncovered. Potential buyers should be extremely guarded and careful before purchasing any bitcoin mining contracts. Services to beware of:
Display Driver Uninstaller. DDU helps create clean uninstalls of display drivers. This can help if you are having issues with the video drivers. In Windows 10 it also disables the automatic display driver updates that can cause compatibility and mining issues.
Launch genoil.bat, and you will start mining. Every time you start it, there will be a small while where the system will say 0Mh/s as your hashrate. Do not worry. Usually, this means that your DAG file is still being generated. The more GPUs you have, the longer it will take.
Also, this calculator shows that DAG size will only reach the point to render 3GB unusable around the end of this year (block ~6.9 million, epoch 231), not epoch 180 like shown in the article. Not sure which to trust…
For example, the RX 580’s hashrate has fallen from 23 MH/s (140 epochs) down to 18.5 MH/s (162 epochs). While the RX range is still great for mining other GPU coins, it’s quickly becoming obsolete for Ethereum mining.
Cryptocurrency mining is a big buzz topic in technology these days and many people have started mining cryptocurrencies. In 2018, Ethereum smashed its long-term $400 ceiling, and reached more than $1,000, which makes it one of the most popular cryptos for mining.
16:19:14:299 25d4 send: {“id”: 2, “mining.authorize”, “params”: [“0x0395f363d6262a3c2d20f38cb477fe5903f7afff.Desktop”,”x”]} 16:19:14:814 25d4 ETH: Stratum – Connected (eth.poolmining.org:3072)
This software was created by the Ethereum team; it is the original ETH miner so you can expect it to be reliable and safe. It is an excellent option for solo mining and it can provide you with a wallet.
The card also excels at mining. The hashrate of this card tends to be 70 Mh/s, but it increases up to 82 MH/s when it’s pushed to its limits. One more thing worth noting is that the power consumption doesn’t exceed 215 W. In the raw hash power stakes, Titan V puts Nvidia far ahead in the raw hash-power stakes, and beats out the closest rival from AMD – RX Vega 64, which consumes more power consumption if overclocked. Titan V is super efficient and can be overclocked up to 82 Mh/s, while the Radeon RX Vega 64 only reaches about 45 MH/s and consumes more power.
Now that you know how to use the profit calculators, you now need to know how to find the hash rates of your system. If your graphics card is not listed on the What To Mine website, this can be a tricky process. Luckily I have compiled a list of sites which have this information.
Step 14 GPU mining (only do this after your blockchain is synchronised): Type in ethminer -G and press enter and then you should start mining with your GPU after building a DAG file which can take around ten minutes. There can be problems at this point. For example the program might say that you have insufficient memory on your Graphics card to mine the with Ethereum’s Ethash algorithm. If this is the case you can still mine with your CPU or go out and buy a new graphics card! You can see our graphics cards and compare their return on investments here and check out our guide on how to pick an ethereum mining graphics card here. We’ve also added a guide on how to build your ethereum mining rig.
The Ethereum Directed Acyclic Graph (DAG) file is stored in VRAM by miners. The DAG grows in size by remaining proportionate to the mining difficulty. About once every epoch (or 30,000 Ethereum blocks), a new DAG is generated, which must be downloaded in order to continue mining.
F2pool is the second largest Ethereum mining pool. It is also a Bitcoin mining pool. However, the Ether mining pool of this site is available only in Chinese. Considering the crazy Asian demand for cryptocurrency, there is no surprise why this pool is so big. This pool charges a 3% pay-per-share fee.
Ethpool is a predictive solitary mining group ( predictable only mining pool ) where 100% of the income is paid to the miner who contributed most of the work. By using Ethpool you get the advantages of mining combined with a solitary mining payment scheme.

Leave a Reply

Your email address will not be published. Required fields are marked *