“ethereum mining rig dec 2017”

“ethereum mining rig dec 2017”

I have bought it, and after five days stats are all ZERO! They do not answer my mails, no explanation, strange options anyhow… Very shady… I’ll wait a bit more, but there are slim chances to earn anything with these guys…
Good question. Typically when you hear numbers such as 1% or 4% a month is good, or 15% per year is good, the person saying that isn’t using leverage, and they also aren’t using stop losses and profit targets. They aren’t getting in and out of the market as it fluctuates. I use leverage and I get in and out, and that is what I try to teach people how to do on this site.
The world of crypto is always changing rapidly, and there may always be a more profitable coin to mine around the corner. If you go with a remote mining provider, you may be locked into one specific cryptocurrency and not be getting the most profit for your hashrate. The same applies for mining pools, you may want to join a specific mining pool for a multitude of reasons, but you’ll only have that freedom when you have a local mining setup.
Some numbers – running ethminer on my CPU gives me a hashrate of 0.248 megahashes per second (MH/s). For comparison, each of my over-clocked AMD R9 390X GPUs gives me a hashrate of about 31.58 MH/s. My GPU gives me 127x the hashrate of my CPU. It is a lowish end CPU AMD FX(tm)-6350 6 core processor and with motherboard + CPU + disk drive + fans consumes about 200 Watts, or 4.8 kilowatt-hours (kWh) per day.
Mining is not easy work for a computer, so the hardware that is required to mine relatively fast can cost thousands of dollars. Most computers which are used soley for mining use multiple graphics cards which cost over $500, and very efficient power supply units. The stress caused by mining on the hardware also makes it much more likely that your units will break or overheat leaving you with useless hardware and lots of potential downtime.
It is possible to mine Ethereum, using online services such as AWS, or DigitalOcean. However, no-one has managed to make this real-time profitable, and you should only take this root if you don’t wish to build your own rig and want to speculate on the pricing.
sudo apt-get install git cmake libcryptopp-dev libleveldb-dev libjsoncpp-dev libjson-rpc-cpp-dev libboost-all-dev libgmp-dev libreadline-dev libcurl4-gnutls-dev ocl-icd-libopencl1 opencl-headers mesa-common-dev libmicrohttpd-dev build-essential -y
Not all traders are alike though, and not everyone trades the same way. A day trader may not need the same amount of money to start forex trading as a swing does. The amount of money you need to trade forex will also be determined by your goals. Are you looking to simply grow your account, or do you seek regular income from your forex trading?
Hi Bhavesh, OK, this seems to be a fairly common error but it’s beyond my capabilities to diagnose precisely from that log. I’ve seen a variety of solutions to this issue proposed on various forums: https://ethereum.stackexchange.com/questions/18806/couldnt-connect-to-node/23153#23153 https://github.com/ethereum/mist/issues/2426 https://github.com/ethereum/mist/wiki#unable-to-find-peers I suggest starting with the simple solutions first before trying the more advanced stuff. So if using Windows, start things up in Administrator mode. Then try starting Geth manually with the –nat=none flag. Then try starting from the command line as someone suggested. You can also backup your data directory, rename / move it, and let the wallet resync itself… From there,… Read more »
Trading foreign exchange on margin carries a high level of risk, and may not be suitable for everyone. Before deciding to trade foreign exchange you should carefully consider your investment objectives, level of experience, and risk appetite. Remember, you could sustain a loss of some or all of your initial investment, which means that you should not invest money that you cannot afford to lose. If you have any doubts, it is advisable to seek advice from an independent financial advisor.
“Brokers reduce leverage the larger the account gets. So a $10,000 account may be able to make 20% a month, but that’s because they have 50:1 leverage. Once the account grows to $100,000 (50,000 in many cases) the brokers start cutting leverage, usually down to about 10:1 or less.”
Check with the original Ether Wallet: You can check the balance and the Ether address (ETHERBASE) even easier with the Ether Wallet. Here you can also manage your Ether very easily. We will show you how to set up your Ether Wallet in this tutorial: “Create Ether Wallet“.
The aim of forex trading is simple. Just like any other form of speculation, you want to buy a currency at one price and sell it at higher price (or sell a currency at one price and buy it at a lower price) in order to make a profit.Some confusion can arise as the price of one currency is always, of course, determined in another currency. For instance, the price of one British pound could be measured as, say, two US dollars, if the exchange rate between GBP and USD is 2 exactly.In forex trading terms this value for the British pound would be represented as a price of 2.0000 for the forex pair GBP/USD. Currencies are grouped into pairs to show the exchange rate between the two currencies; in other words, the price of the first currency in the second currency.Some commonly traded forex pairs (known as ‘major’ pairs) are EUR/USD, USD/JPY and EUR/GBP, but it is also possible to trade many minor currencies (also known as ‘exotics’) such as the Mexican peso (MXN), the Polish zloty (PLN) or the Norwegian krone (NOK). As these currencies are not so frequently traded the market is less liquid and so the trading spread may be wider.
If you don’t get any memory errors, that means your GPU is having no problems running at those clock rate. Now we will try to increase memory clock rate by 50mhz increments, and each time you increase memory repeat step 4 and 5 (if you see no difference in hashrate after chaning memory clock rate you need to restart your PC, sometimes if you change overclock/undervolt a lot it will stop making change). We want to repeat that process till you start to see memory errors, depending on them do the following:
Balance of trade levels and trends: The trade flow between countries illustrates the demand for goods and services, which in turn indicates demand for a country’s currency to conduct trade. Surpluses and deficits in trade of goods and services reflect the competitiveness of a nation’s economy. For example, trade deficits may have a negative impact on a nation’s currency.
The get-rich-quick schemes will often punt high gearing as a way to double your money overnight, but what they never tell you is that a single trade can wipe you out – and no one gets it right consistently.
Step 15 and 16 possible error: If you are not patient is “JSON-RPC problem. Probably couldn’t connect. Retrying in 1…” As you can see in the screenshot bellow this happens when you don’t have the blockchain synced yet.
This view looks at the number of coins you can expect to generate in the future. This view does not account for any expenses, it simply predicts how many coins you will generate with your given hashrate and the diff change value. A high diff change will cause you to generate fewer coins in the future.
Jump up ^ B Laurens, H Mehran, M Quintyn, T Nordman – Monetary and Exchange System Reforms in China: An Experiment in Gradualism International Monetary Fund, 26 September 1996 Retrieved 14 July 2012 ISBN 1452766126
Up to a point, more VRAM will also improve performance. The present difference between a 4- and 8-gig version of the same card can be up to 5 MH/s (To clarify, MH/s stands for megahash per second, and a megahash is a million hash attempts.)
Could someone help me out here. I’ve got a R280X that should run around 290 h/s on equihash. I runs great guns on Cryptonite 485 h/s but when I start Claymore Zen64 miner it starts out at 275 h/s and then starts to throttle back to 150 h/s. It drops my clock speed in half and I have no control over setting thru MSI afterburner. It mines along but at half the speed 500mhz.
Don’t get me wrong: I’d LOVE to be able to do what you say one can do. But after almost two years of forex (of which, over one year was spent just learning forex and practising with a practice account, and then over half a year with a live account), the BEST I can make is 0.5% a day. And most days I don’t even make that. That’s just a FIFTH of what you say one can make.
In the Forex market, currencies always trade in pairs. When you exchange US dollars for euros, there are two currencies involved. For every foreign exchange transaction, you must exchange one currencyfor another. This is why the forex market uses currency pairs, so you can see the cost of one currency relative to another. The EUR/USD price, for example, lets you know how many US dollars (USD) it takes to buy one euro (EUR).
Anytime you create a transaction in Ethereum, the string that is returned is the Transaction Hash. You can use those to keep track of a transaction in progress, or the amount of gas spent in a past transaction using eth.getTransaction() and eth.getTransactionReceipt. Here’s how to use it:
Good morning from Q City, so i have a noobynoob question. I am very beginner and now I mining on 3 PC. Two of them mine ethereum using 470×2 and 480×2 – I`m using dwarfpool and Claymore`s Dual miner and everything is okay when i check my wallet raits the balance is growing like beautiful garden with hundreds of mexicans working on it, !!BUT!! on my third PC I am using single msi gtx1080 gaming X to mine some zec using dwarfpool and nheqminer5c it working on 400 sol/s but my balanace is still 0.0000 after 10 hours of mine. So what the problem, or my mistake>>??? Im using wallet creating on HitBTC, is it okay>>>>?? HELP PLZ!!
With a $3000 account, and risking no more than 1% of your account on each trade ($30 or less), you can make $60+ per day. With a $5000 account, you can risk up to $50 per trade, and therefore you can reasonably make an average profit of $100+ per day.
OK so this sounds like a problem with your graphics card driver. Are you using the latest driver for your card? If you’re using a standard Windows driver, this could be the cause of your problem. So I suggest you check out the relevant Nvidia or AMD website and get the latest GPU drivers for your machine.
Note that we’re comparing (a) mining Dogecoin (or another Scrypt coin) directly using a Scrypt ASIC miner with (b) using a graphics card to mine using X11 or other CPU/GPU algorithm (ala Simplemulti).
In the early days of GPU mining, AMD cards were the clear winners, in terms of performance. More recent Nvidia cards (such as the Titan range) match or even exceed the performance of AMD cards. Mining performance for certain coins may be better or worse, depending on the manufacturer.
Even with your hardware, geth, and Ethminer set up, you’re unlikely to be able to actually mine ether on your own. The reason for this is that your device will simply not be able to compete with the hash rates of much larger systems and networks of miners. For that reason, most ethereum miners join a mining pool. By pooling together computational power, these miners increase their chances of solving block puzzles and thus earning ether. At the same time, the profitability for each individual goes down, as the profits are split proportionally, with those miners able to provide more computing power receiving a greater share.
Click on Save Your Address and then select the “Keystore File” radio button and then click on “Select Wallet File”, browse to your recently downloaded Keystore File (which starts with “UTC…”) and select it.  
The Blockchain is saved under “C:\Users\Your_PC_Name\AppData\Roaming\Ethereum\chaindata”. It has helped us from time to time, to stop the download and restart it again. You do not have to download the Blockchain again, but continue with the last downloaded block.Start Solo Mining: After your Blockchain has been downloaded completely, you can finally start with Ether Mining. Please make sure that the prompt window which the Blockchain is downloaded in, is always open during the Ether Mining. Open a new prompt window in order to start Ether Mining and enter the following commands one by one and confirm each with the Enter key:
There are at least two other protocol upgrades planned in the future: “Metropolis” is intended to reduce the complexity of the EVM and provide more flexibility for smart contract developers.[35] Metropolis also adds supports for zk-SNARKs (from Zcash); with the first zk-SNARK transaction occurring on testnet on September 19, 2017.[25] “Serenity” should include a fundamental change to Ethereum’s consensus algorithm to enable a basic transition from hardware mining (proof-of-work) to virtual mining (proof-of-stake).[35][36] Improvements to scalability, specifically sharding, are also said to be a key objective on the development roadmap.[37][38]

Leave a Reply

Your email address will not be published. Required fields are marked *