“ethereum mining rig uae”

“ethereum mining rig uae”

An uncle is a stale block, usually beat to the blockchain by another block. The Ethereum network compensates miners for these though they receive a lesser reward. As you mine a block, you’ll receive a reward for no more than two uncle blocks included. The pay you receive is for uncles up to six blocks back.
In our calculations, we also used a favorable, but not ideal, scenario for electricity costs. Consider the following three examples, one of an individual miner in Connecticut, one in Washington D.C., and our hypothetical mining rig:
For a prelude, back in December 2017, I decided to build up to 12 GPU mining rig, using kind of dollar cost averaging – installing a new graphics card once in a month. Now, about 30 days later I have a 3 graphics card mining rig, and I’m dual mining Ether and Siacoin, These 3 cards combined gives me about 41 MH/s hashing power – which translates into some $5-$6 per day (not counting in fee for electricity)
Notice the wave pattern in the chart? Our guess is its claymore’s dev fee kicking in at that time. We also seemed to had some internet outage (and that is the most annoying thing ever – no internet, no mining)
The takeaway here is that hashrate has followed (with some appreciable lag) the ETH price explosion, which began in late January 2016, saw some downturn in late 2016, but then exploded again in Q2 2017.  What an amazing bull run! Up to almost $400 USD from just $10 USD in a few short months.
not if ethereum is your only plan and you have to pay full price on cards. i can buy cards as business expense, so no tax for me. i can write them off, so they’re again half in price. i bought some to a decent low price, (gtx 1070 for 400€) so total expenses I need for break even is 180€ per card. this should/could work out. and if not, I can sell the cards off for half the price and still be able to break even (without any cent mined), although I would rather stick to it and mine for the only real reason to mine: support an idea. be it a crypto currency or something like folding at home.
Every single rig we build has incredible raw power and can efficiently mine any cryptocurrency to ensure excellent profits for you. Each rig is supercharged with of optimisations learnt in our trade.
I’m having the same problem as Majorano. I double checked everything up until this point and I am 95% sure it is all correct. Here is what command prompt is giving me (my .bat file is called Armageddon):
The GTX 1070 has a steady hash rate of 26 Mh/s with a power draw of about 135W, with a monthly profit of 58.18 USD and a power cost of 8.26 USD per month. This card will take just under 9 months to pay itself off at 500 USD, and 8 months to pay off at 569 CAD.
Ethereum also features decentralized apps (Dapps), which are one of key components of Ethereum’s fast growth in the past few months. Ethereum blockchain is the base on blockchain on which you build smart contract apps and programmes. Also, there are real figure heads that run Ethereum (it is owned by Vitalik Buterin) unlike Bitcoin, which is owned by no one and can’t be controlled by anybody apart from those who use it.
Eobot supports mining for Ethereum! Ethereum is a decentralized platform that runs smart contracts: applications that run exactly as programmed without any possibility of downtime, censorship, fraud or third party interference.
A Radeon R9 HD 7990 will cost you $680. Its power cost per day is lower than the R9 295X2 at $1.08 but its hash rate is significantly lower at 36 MH/s. Its return per day is $1.29 while its cost per MH/s is $18.89, giving it a return per year of $469.40.
After looking up the price of hardware and the associated costs of having my own rig, I’ve decided to leave it to the pros. I recommend that everyone read the FAQ so your expectations are better managed. SO FAR SO GOOD!!
Building your own is much cheaper, and (arguably) more fun! If you’re handy, you can put together a simple aluminium frame yourself for a fraction of the cost of buying one. If you don’t have the necessary skills or tools for that, I popularized building mining rigs inside plastic crates back in 2013, and that still works fine today (for up to 4 GPUs or so, anyway). At the bottom of this post, you’ll find instructions on how to build a plastic crate “case”.
To others who are reading this comment, this tutorial is for a single slot miner. A single slot miner has an overall lower footprint, both in terms of power draw and overall cost, compared to a multi-GPU miner. They are cost-effective only for those who want to get their feet wet since the cost of entry is fairly low.
If you’re reading a newbie’s guide to Ethereum mining and have a GPU powerful enough to make it worthwhile, we’re going to assume you’re running Windows so we’ll focus on mining Ethereum on that platform.
This is really overpriced. Buy 4 7990 and get 200 MH/s for around 2600. MB, CPU, HD, PSU, riser cards and built an open air case for around $400. Then if it ever gets to the point mining isn’t profitable sell the cards etc. and save money and make more money than paying $4400 for 100 MH/s…
Mining Ether takes up a lot of electricity, and you are right in being concerned about this. On the plus side, though, if mining practices are carried out efficiently more income is generated through the sale of Ether. You will need your Ethereum Mining calculators for the process.
6x USB Riser Cables –  USB Riser Cables – These are to connect the 6 graphics cards to the motherboard and allow spacing between cards for heat dissipation. These are necessary when building a rig with this many GPU’s.
They also have regular promotions, where their customers receive automatic upgrades or promo codes to have percentages added to their hashpower, or to have percentages off of their contract price. Watch your email after a signup (you may also use HF17PLUSBTC3 discount code for an immediate 3% discount). At Hashflare you can also mine Bitcoin and a few other crypto-coins.
The current top gaming graphics card, NVIDIA’s GeForce GTX 1080 Ti, delivers the highest Ethereum hash rate but it also consumes drastically more power under load when mining, versus more midrange cards like the GeForce GTX 1070 or AMD Radeon RX 480. Furthermore, with a bit of memory clock and power target tuning, the GTX 1070 can deliver a higher hashrate, while still maintaining a much lower power draw than the 1080.
Since we’re talking about mining, there’s always electricity involved, and every day we’re seeing more and more people posting pictures of their rigs and we’re seeing the results in how much difficulty has risen this month alone, and my guess before february is over we’ll be seeing 50% less profits than we’re getting now.
Using the growth of block difficulty, we can calculate that over a period of one year, the difficulty factor will grow from 2,280,210,891,539,710 to 11,880,071,363,893,300. We do this by using the fit of the difficulty function and assuming this fit will be true for future values.
It’s comments like this that have me scratching my head. I assume you’re solely talking about ETH mining drying up, considering this is /r/EtherMining, but why make it seem like the end of days is coming? If ETH dries up, yes it would suck, but it would take maybe an hour to download, reconfigure and re-aim your processing power at a different coin.
The What To Mine Calculator is hands down, the most useful mining calculator. The reason being that you simply fill in your graphics cards models and the site will calculate the power draw, hash rate, and the most profitable coin for your set up. The site will even show you the best exchange to sell your coins on. Additionally, the site will also apply a reasonable overclock to the cards making your results even more accurate. When mining, overclocking is extremely useful so think of this as “free performance.” The only downside to this site is that it only has information on 11 different GPUs and no CPUs. You also can’t fill in your pools fee. This site is still extremely useful for finding the most profitable coin to mine, making it my preferred calculator.
After you calculate the amount of kWh you will be using every month, multiply the kWh per month by the amount you pay for electricity in your country, and then you will find out the cost. Take your monthly power cost away from the value of the amount of the currency you mine to find your monthly profits. Though most mining calculators include this calculation for you, it can be very useful to find the exact amount you will be spending on power.
And then once unlocked you can scroll down and see “Your Address” – this is your Ethereum Wallet address that we will use for mining.  Save it to a separate notepad text file and save it on your Desktop for easy access (Note: it’s okay to share this address as this is how people will send you Ether and how you will receive your mining payouts, but Never share your Private Key!).  
I’ve had success both ways and so if you run into an issue with one method delete the drivers and try the other method.  And if you do need to remove your drivers use the DDU (Display Driver Uninstaller) program from Guru3d.com to remove everything cleanly and then start over.  
Today I got a Sapphire Tri-X R9 290. They’re a beast of a card with 2 8-pin power connectors (won’t boot up with 6-pin), and it’s physically the biggest card I have. With the R9 290, I find I get ~5% better hashrate with Claymore instead of Genoil’s miner (with R9 380s, it’s almost identical). At the stock 1/1.3G clocks, I was getting 28.3Mhs, and OC to 1125 I’m getting 31.8Mhs. Only running for under 1hr at 1125, so can’t say if it is stable yet.
Bought the Gemini package. Happy with the daily payouts at 5 MH/s Day1 .0038211 , Day2 .0037431, Day3 .00116143, Day4 .00116143, Day5 .00118242, Day6 .00039933 Dash coin. I upgraded on the 7th day and will continue to upgrade little by little to increase daily payouts.

Leave a Reply

Your email address will not be published. Required fields are marked *