“Ether Mining Maschinen”

“Ether Mining Maschinen”

The only difference is that NVIDIA GPU’s work better in dual mining Sia coins rather than Decred as it’s the case for AMD cards. In dual mining you can get even slightly higher hashrate than just solo mining ethereum. I found out that the best pool for SIA is Nanopool.
This guide is focused on the Ethash algorithm mining, so the settings and the tutorials from this guide are not optimized for the other mining algorithms like CryptoNight. For this I plan to make another guide or expand this one so that you will understand how to optimize your GPU’s for the other algorithms.
The estimated expected cryptocurrency earnings are based on a statistical calculation using the values entered and do not account for difficulty and exchange rate fluctuations, stale/reject/orphan rates, and a pool’s efficiency. If you are mining using a pool, the estimated expected cryptocurrency earnings can vary greatly depending on the pool’s efficiency, stale/reject/orphan rate, and fees. If you are mining solo, the estimated expected cryptocurrency earnings can vary greatly depending on your luck and stale/reject/orphan rate.
Step 12: Type in “cd prog” and then press the tab button. This should look like this C:\>cd prog and then press “tab” which will automatically complete the phrase for the closest fit found in the C: drive just like autotext does on your Iphone. After pressing “tab”, you should see C:/> cd “Program Files” and press enter which should give you a new line saying “C:\Program Files>”.
The value of dedicated GPU is going beyond the needs of gaming, it is proven to fulfill the professional needs for Deep Learning researches. As it turns out the modern graphics cards are very good at achieving the framerate requirements for virtual-reality. To our biggest surprise, GPU is profitable at mining crypto-currency again, such as Ethereum, so we can profit from our current hardware setup. This article will run through the basic mining knowledge, and guides how to setup a Windows 10’s machine with a GPU to do Ethereum mining.
All disputes or claims arising out of, relating to, or in connection with the Terms, the breach thereof, or use of the Ethereum Platform shall be finally settled under the Rules of Arbitration of the International Chamber of Commerce by one or more arbitrators appointed in accordance with said Rules. All claims between the parties relating to these Terms that are capable of being resolved by arbitration, whether sounding in contract, tort, or otherwise, shall be submitted to ICC arbitration. Prior to commencing arbitration, the parties have a duty to negotiate in good faith and attempt to resolve their dispute in a manner other than by submission to ICC arbitration. The arbitration panel shall consist of one arbitrator only, unless the ICC Court of Arbitration determines that the dispute is such as to warrant three arbitrators. If the Court determines that one arbitrator is sufficient, then such arbitrator shall be Swiss resident. If the Court determines that three arbitrators are necessary, then each party shall have 30 days to nominate an arbitrator of its choice — in the case of the Claimant, measured from receipt of notification of the ICC Court’s decision to have three arbitrators; in the case of Respondent, measured from receipt of notification of Claimant’s nomination. All nominations must be Swiss resident. If a party fails to nominate an arbitrator, the Court will do so. The Court shall also appoint the chairman. All arbitrators shall be and remain “independent” of the parties involved in the arbitration. The place of arbitration shall be Zug, Switzerland. The language of the arbitration shall be English. In deciding the merits of the dispute, the tribunal shall apply the laws of Switzerland and any discovery shall be limited and shall not involve any depositions or any other examinations outside of a formal hearing. The tribunal shall not assume the powers of amiable compositeur or decide the case ex aequo et bono. In the final award, the tribunal shall fix the costs of the arbitration and decide which of the parties shall bear such costs in what proportion. Every award shall be binding on the parties. The parties undertake to carry out the award without delay and waive their right to any form of recourse against the award in so far as such waiver can validly be made.
Thanks for the great guide. As a 72 year old, trying to figure things out isn’t always easy. I tried to ask this question on Bitcoin forum for Claytons mining software, but can’t figure out how to post the question in the right place. I have set everything up as you said and am mining Ether at 1600Mh/s, but I am apparently mining Decred as well at 1550Mh/s because the batch file from the Clayton miner has in the batch. Here is the batch file: setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100… Read more »
Da ich selbst BLK besitze und auch ein bisschen PoS betreibe, kann ich dir sagen, spielen die 1% in der Endabrechnung keine Rolle. Natürlich erhöht sich die Menge, doch allein die Kursschwankungen und Kursbewegungen werden immer wesentlich größer sein als die 1% Stake.
-logsmaxsize   maximal size of debug log files, in MB. At every start the miner checks all files in its folder, selects all files that contain “_log.txt” string and removes oldest files if summary files size is larger than specified value.
Zudem spielt dieser auch bei der Betriebs-Profitabilitätsrechnung eine große Rolle. Denn die Betriebskosten bei den Mining-Anbietern werden in US-Dollar bezahlt. Somit kann auch bei steigender Komplexität, aber steigendem Bitcoin-US-Dollar-Kursverhältnis das schürfen weiterhin erträglich sein. Je länger die gekaufte Hardware profitabel schürfen kann, desto höher die Gewinnchance.
Set up SSH: If you’re going to set up SSH, there are two important things you need to do. Firstly, set up port forwarding on your router, so that traffic redirects to your rig. Secondly, use the below commands, to change the SSH port to something different e.g. 2221. While this won’t stop an attack if there is a port scan, it will reduce the possibility of an attack by a crawler. You can also consider using private & public keys to 100% ensure that only you can access the rig.
Das funktioniert nicht ganz kostenfrei, bietet aber die Möglichkeit unkompliziert Ethereum zu minen. Zweitens gibt es Mininghardware und Miningsoftware für den Heimgebrauch. Eine Ethereum Mining Anleitung steht auf unserer Seite zur Verfügung. Grundsätzlich ist Ethereum Homemining profitabel, solange ein paar Faktoren beachtet werden.
Ein zweiter, und vielleicht wichtigerer Grund für die Difficulty-Bomb ist jedoch der geplante Wechsel von Ethereum von PoW zu PoS. PoW bedeutet “Proof of Work” und meint, dass die Miner um den Block-Reward konkurrieren, indem sie beweisen, dass ihre Computer Rechenzyklen verbrauchen. PoS hingegen bedeutet “Proof of Stake” und meint, dass die Miner nicht echte Computerleistung investieren, sondern lediglich Ether, mit denen sie simulierte Miner kaufen und mit diesen um die Blöcke konkurrieren. Anstatt Miner heißen sie nun Staker.
SPLASHTOP – If nanopool finds a problem the best way to fix the issue is using remote desktop software to access your rigs. Instead of Splashtop you can use Teamviwer they do the same job. And as your Main GPU is integrated one, the streaming software will not have big impact on the hashrate or stability of the rig.
Hopefully at this step everything is great. In the command prompt or PowerShell you used above, cd into /cpp-ethereum/ethminer/Debug. You’re going to see a file called `libcurld.dll`. Make a copy of that file and place it in the same directory, removing the ‘d’ in the name to make it `libcurl.dll`. I’m not sure why, but there’s some build error which causes that name to be incorrect, which causes ethminer to fail at runtime.
Angesichts der schnell schwankenden Kurse bleibt das Kryptogeld-Mining ein Risiko-Investment: Beim obigen Beispiel gibt man 2100 Euro für Hardware aus und pro Jahr zusätzlich 2400 Euro für Stromkosten. Fällt der Krypto-Kurs drastisch, ist der Betrieb des Miners plötzlich unrentabel.
Now replace “” with your Ethereum Wallet address (which starts with 0x…) so copy that from your other text file and paste it here.  Then replace “” with any name you would like to create for your miner.  We’ll use “MiningRig1” for our example, so you now have:  
We hope you find this guide useful!  If you run into any issues or have questions, please comment below and we will try to help.  Note, we are not covering more advanced steps of mining such as overclocking and undervolting, bios flashing, remote access and monitoring, or Dual mining.  If you want If interested in taking your mining to the next level here, sign up for Crypto Mining Academy, where I go into massive depth and detail at every step of this process in a comprehensive course.  Happy Mining!  
STEP – Leave the miner for 2 hours to be 100% sure you didn’t crash the rig and look for incorrect shares, if you get incorrect share,freeze,GPU settings reset then you need to reduce the Memory Clock rate by additional 50mhz. For example my Micron GTX 1070 GPU:
PRIX DE VENTE: $ + TAXES MARQUE: ASUS MODÈLE: GT610-SL-1GD3-L GARANTIE: 3 MOIS INFOS: – GPU de 40 nm: consommation réduite d’énergie et transistor plus Tom’s Hardware (Presence PC) – Actualité matériel informatique, multimédia, internet : news quotidiennes, Tests et comparatifs de matériel PC – Toms Hardware
Last but not least, if you compare AMD RX vs Nvidia GTX, you’ll find more GDDR5 memory along with a higher bandwidth (nice for memory-hard cryptos like ours), and much more shading units ! Some laborers ! Good point for AMD, whereas Nvidia gets better when it comes to frequencies. Usually both clock speed and turbo clock speed are higher, so it can meet gamers’ expectations for framerate in complex scenes.

One Reply to ““Ether Mining Maschinen””

  1. Bei diesem Algorithmus, der beispielsweise in der Bitcoin Blockchain Verwendung findet, müssen Miner im Netzwerk eine Rechenleistung aufbringen, um die Blockchain auf einer identischen Version zu halten.
    For the CPU part of this guide, we are going to use Nicehash miner. While this miner works for both CPU and GPU, we are going to get the best performance if we use different miners for CPU and GPU. This is because the Claymore miner is faster but only works for CPU.

Leave a Reply

Your email address will not be published. Required fields are marked *