“Ethereum Bergbau mit RX 550”

“Ethereum Bergbau mit RX 550”

We will need to repeat the process for each GPU individually, it’s very important to test it that way so if you end up getting a crash or reset, you will know exactly at what part that happened so  that you can reverse the crashing settings.
6/26/2017 Update – The MSI Z170 Gaming M5 is getting harder to find and we listed up some alternative motherboard choices. MSI is no longer producing or selling that model, so whatever is left in the market is it. 
– Memory may or may not affect overclock. This is up for debate. I personally downclock my memory (reported to be downclocked and confirmed by all software from msi afterburner to gpuz to sgminer to ethminer) and on both extremes, low and high, I notice no difference in hash power over a 24 hour period.
Change power options so that the computer automatically turns itself on whenever power is restored. The reason for this is two-fold: first, it’ll make sure that your miner automatically starts up after a power outage. Second, it makes powering the computer on much easier if you don’t happen to have a power switch connected to the motherboard.
You can now test that your rig is mining using the first command, and then start mining using the second. It’s a simple as that. If you want to use a pool different to Nanopool, then, of course, replace it with your chosen one.
Alternative #2: Awesome Miner can connect to any computer running Claymore’s Dual Ethereum+Decred Miner if the API is enabled. It can be any computer, Windows or Linux, as long as the mining is running already.
Zugleich sinkt die tägliche Rate, mit der neue Ether entstehen. Im Januar und Februar haben die Miner noch rund 30.000 Ether am Tag erschaffen. Heute sind es nur noch etwa 27.500. Wenn die Blöcke langsamer fallen, entstehen auch weniger Ether am Tag. Ist klar.
Geth is the program that communicates with the Ethereum Network and acts as the a relay between your computer, its hardware and the rest of the ethereum network computers so if a block is mined by another computer your Geth program will pick it up and then pass on the new information onto your GPU or CPU for mining.
If you are looking to build a mining rig, be sure to check my other recommended build components in my complete GPU Mining Rig Build Guide. If you are looking to mine Litecoin, be sure to check out our Litecoin Mining Hardware Review.
It is using Nanapool in US east cost address eth-us-east1.nanopool.org:9999 as the mining pool. As a general rule of thumb, choose a pool address that is closest to your geographic location. Important don’t forget to change 0xf1cfc50567acf36c55ba75540b7f1c3f1aaa986 to your Ethereum wallet’s public address; otherwise, you are contributing to my wallet :). After the next /, gives a name to the mining machine. The next / is optional, you can provide your email address for notifications and enabled the ability to update Nanopool’s payout schedule, i.e. this is good to provide an email.
Honestly its super weird how this issue was resolved. Basically I just rebooted several times and then it started working…. I really don’t get this stuff, I have 2 degrees in computer science and an A+ cert and still don’t understand it lol
There is some delay so don’t worry if you don’t see anything after you just start mining. Wait at least 20min before trying to check your account since it doesn’t create a webpage for you until you get a share.
STEP – This is where the optimum should be, reduce the power draw to only 50% and test for 3-5 minutes. It should give almost full hashrate with massive 50% power draw reduction. If you get crash/freeze/Claymore error increase the power draw to 60% and that’s your optimum. You should get something like this:
      EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool http://sia-eu1.nanopool.org:9980/miner/header?”address=YourSiaAddress&worker=YourWorkerName” -dcoin sia
Looking at the RX 470, we can do some quick math ($175 / (211 GB/s) ) to see that it costs $0.82 per GB/s.  Compared to a single GDDR5 chip (e.g. Micron EDW4032BABG), which costs $6.83 and has a bandwidth of 24 GB/s, we can do better at $0.28 per GB/s.  So, if we can build custom chip (either ASIC or FPGA) than can interface with 9 GDDR5 chips, we’ll have a memory bandwidth of 216 GB/s at a price of $61.47.  This still isn’t a finished mining product, since we need a FPGA or ASIC memory controller, circuit board, & support electronics.  If the shipped final assembly (adding additional parts, processes, testing, & logistics) costs less than the RX 470 (only $175), then the custom board will beat the GPU based card.  That is, until a faster, more efficient, cheaper graphics card comes to market.  For instance HBM graphics cards cards are already available.  But, if you find low cost, off-the-shelf, FPGA or ASIC chips with 5-10 DDR or HBM memory controllers, or your company is experienced in building custom high memory bandwidth ASIC solutions, you may be able to beat out off-the-shelf hardware.  But, in this situation, you should probably change your business model and build graphics cards instead, since that’s already a huge market.
Wer den Coinwert als Kalkulationsfaktor miteinbezieht, sollte sich an die Idee hinter der Währung halten. Noch ist bei den Kryptowährungen jede Menge Luft nach oben. Nur Bitcoins konnten alle anderen abhängen. Stellt sich die Frage – was passiert, wenn das erst der Anfang im Rennen um die Coins war? Welche Währung ist die nächste?
As most altcoin algorithms are memory heavy, ASICs would not be faster then GPUs as memory speed would bottleneck device as ASICs and GPUs use same memory. Only gain from ASICs would be fact, that they would be more power efficient, but impact on mining would not be as near as close as it was when BTC went from GPUs to ASICs when we say massive increase in performance and massive drop on power usage at same time. And that is biggest reason why there are non and most likely wont be one in near future.
Wenn man jedoch genau hinschaut, erkennt man, dass die Difficulty ein Stückchen rascher ansteigt als die Hashrate. Eigentlich sollte beides synchron verlaufen bzw. die Hashrate sollte der Difficulty vorauseilen.

Leave a Reply

Your email address will not be published. Required fields are marked *