“Ethereum Bergbau mobile Eth Wasserhahn”

“Ethereum Bergbau mobile Eth Wasserhahn”

Due to the massive demand for Ethereum mining rigs you’ll see cards sold out at most retailers (Nvidia has even put out a statement about it). If you’re willing to pay a premium you can find them at a higher cost but we recommend finding the cards for their retail price. The GeForce 1070 is easier to find from our research.
The Titan Xp can be overclocked to 42 MH/s, but it will consume 300 W when pushed that hard. It achieves an excellent hash rate without too much expenditure of power. Meanwhile, its top-end AMD rival, the RX Vega 64, achieves a very similar performance for about half the price.
Video Cards: AMD Radeon RX 470/480 and Radeon RX 570/580 video cards are all the rage right now when it comes to ethereum mining, but they are extremely tough to find since they are all being bought to mine ether.
First, head over to Etherscan’s Mining Calculator, which provides up-to-date figures for the current price, block time and network hashrate (as measured in Gigahash per second aka GH/s; denoting billions of calculations per second):
You will need to enter in the stratum/IP address of your mining pool, then your worker name followed by password for your worker on the mining pool. Note: not all pools require a password, you can just put “123” if you want.
I’m FPGA design engineer, and I’m thinking in learning more about Ethereum to make a FPGA implementation, but I’ve read in many sites that Ethereum is ASIC resistant but I couldn’t find any technical explanation.
BTC can be easily sold for cash so, indirectly, mining ETH can be a good way to fill up your bank account or earn cash. ETH can also be sold directly on several major exchanges, such as Bitfinex, BTC-e, Kraken, Gemini and Coinbase.
You can determine the rating for efficiency by dividing the hashrate by the power consumption. Newer cards are usually more efficient. This rating is of prime importance—given that electricity is a fixed, ongoing cost. In other words, the more efficient your card, the more profitable it will be once you’ve received the ROI.
In NO scenario that a miner should modify the transactional content, in order to manipulate the hash result, miner can only modify the “nonce” section to generate a hash result and check if the hash result meets the target requirements. For each “nonce” change, recompute the hash result and compare against the target requirements, is exactly ONE hash. The speed of Ethereum hash is currently measured by MH/s (1,000,000 hashes per second) by using a GPU. For instance, Nvidia GTX 1070 can compute 25 MH/s without overclock (after overclock, it gains 20% speed and reaches 30 MH/s).
Going back to the analogy of real-world mining, in cryptocurrency mining you can use different tools to find the gold, so-called mining software. Each mining software has evolved over the years, but some have developed more than others. The primary contenders for Ethereum mining are Claymore and Genoil.
If some cards are 2GB and some >2GB, 2GB cards still mine for you during devfee time, only cards that have more than 2GB memory will be used for devfee mining. Miner displays appropriate messages during startup.
Für mich gibt es bislang keinen Beleg dafür, dass PoS der Umverteilung tatsächlich merklich ungerechter zugeht als bei PoW. Daher finde ich PoS langfristig interessanter, weil man sich zumindest die Ressourcenverschwendung sparen kann.
This entry was posted in GPU Mining Rigs, Mining Rig Configuration, Mining Rig Guides and tagged 1070, 1080, 1080 ti, 2018, amd, Bitcoin Mining Hardware, custom mining hardware, ether mining, ethereum, ethereum mining, ethereum mining hardware, ethereum mining rig, gpu, gpu mining, graphics card review, graphics cards, mining gpu, Mining Rig, nvidia, rx 470, rx 480, rx 580 on January 22, 2018 by Josh.
Hey I have a question. Does Ethereum wallet ever gets fully synced? I’m running it for more that 3 days and now I got to the end and it wont sync at 100% cloud is at 69% and still some blocks left (currently 111) and it’s going up and down. I set up mining process successfully and got it to work (after solving antivirus problems that 5 times removed ethereum.exe…) I’m just curious about this wallet sync. Thanks
   If you mine ETC on some pool that does not accept wallet address but requires Username.Worker instead, the best way is to specify “-allcoins etc”, in this mode devfee mining will be on ETC pools and DAG won’t be recreated at all.
As you can  see in the dual mining configuration, the last part is “-dcri 25”. That means that the  dual coin is set to mine intensively ,  and it shows how much GPU core is assigned for that task. Yes it’s needed for solo mining too, and needs to be set to 6! This is a very important part because it’s DEPENDANT ON THE GPU SERIES. The only noticeable difference between the RX 570 and RX 580 series is their GPU Core. The memory (used for ethereum mining) is almost the same on those cards, so there is basically no difference in  the ethereum hashrate, but the big difference comes in the GPU Core. The RX 580 series can handle around -dcri 25, don’t go above that because it can reduce your ethereum hashrate. For RX 570 series the optimal -dcri is around 19-22. For some cards even lower as 13, this needs to be tested by yourself. The proper way would be to start with -dcri 10. Then using your keyboard press “+” or “-”, that way you can increase or decrease -dcri by 1, as you will see on the claymore miner. By going up you will see the dual coin hash rate going up, repeat  that until you can start to see the ethereum hashrate decrease, then, after you find that spot reduce -dcri by 3, so you are not pushing the GPU to the limit. On the RX 570 series it’s possible to get a higher hashrate on ethereum with dual mining rather than just solo mining. Optimal for RX 570 is around -dcri 19 , optimal for RX 580 series is around -dcri 25. For some cards it’s possible to go even further, but it’s not worth it to stress the GPU too much.
Some settings should be modified in Windows to get you ready for mining.  First, you don’t want your computer to go to Sleep as it will interrupt your mining so go into your Power Settings and set it to “Never” turn off/sleep.  
So I had this awesome idea for sticking a single mem controller and processor with 16gb of ddr5 ram (which is actually fairly cheap at $6-7 each) only to find out I have a LOT to learn about electrical engineering and programming.
I’m going to assume that everyone reading this is capable of installing a fresh copy of Windows. Complete the installation and boot into the Windows desktop before proceeding to the next step. If necessary, also install the LAN/Ethernet driver that came with your motherboard so that you can get online.
Hat der Miner eine korrekte Nonce (zufällige Zahl) gefunden, entsteht ein Hashwert der gültig ist. Damit kann ein Miner den anderen Netzwerkteilnehmern in einer Blockchain beweisen, dass er einen „Arbeitsaufwand“ getätigt hat. Dank diesem Arbeitsaufwand, kann ein Miner bestätigen, dass sein erstellter Block den Regeln der Blockchain entspricht.
Um Bitcoins zu senden, zu empfangen und zu sichern wird eine Bitcoin-Wallet benötigt. In der Bitcoin Wallet wird der Private Key (Private Schlüssel) gesichert, mit dem auf die eigenen Bitcoins zugegriffen werden kann. Das Angebot an Bitcoin-Wallets und die Funktionen der Wallets sind mittlerweile riesig. Wir testen und vergleichen die besten Bitcoin Wallets.

One Reply to ““Ethereum Bergbau mobile Eth Wasserhahn””

  1. Thats the point with any ASIC miner, if you live in a country with high electricity costs, its allways a problem, but look at these small usb miners with 2.5 watts, it will get you 3 ETH at the moment per Month if you mine ETH, so it is not a bad deal. If you mine ETH classic the difficulty level is way lower then from Ethereum, check this live link so see the actual Hashrate from each network.http://fork.ethstats.net/ the classic is aprox. 10 times lower then ETH, but the price is only aprox. 5times lower, so if you min classic you have way more money at the end, i didnt do the math exactly, but i would say with this little USB miner which cost 149 U$ you can mine aprox. 75$ a month with ETC at the moment. Any comments are welcome.
    Overclocking Tool. If you’re planning to optimize the performance of your rig (which you should be), it’s recommended that you get an overclocking tool of some kind. Most GPU manufacturers will provide one for you to use. Also, depending on which mining software you will use, you will need it to control the fan speed on the GPUs. Furthermore, AMDs new WattMan has proven to be a very well designed software tweaking your GPU settings.
    Dear rufio88, I’m experiencing a problem that showed up today, after an unwanted windows update (that I was stopping for about 3 weeks), my mining rig slowed down a 35% in hash rate. I have windows 10. Are you or anyone else you know having the same problem ?
    The User recognizes that the Ethereum Platform is under development and may undergo significant changes before release. The User acknowledges that any expectations regarding the form and functionality of the Ethereum Platform held by the User may not be met upon release of the Ethereum Platform, for any number of reasons including a change in the design and implementation plans and execution of the implementation of the Ethereum Platform.

Leave a Reply

Your email address will not be published. Required fields are marked *