“Ethereum Mining ist es wert 2018”

“Ethereum Mining ist es wert 2018”

Now all of your GPU settings are displayed. We will need to change each GPU to be in MINING (Compute) mode. By default each GPU is in graphics mode, and to enable proper mining (high hashrate due to DAG fix) we will need to change each GPU’s “Global Graphics” “GPU Workload” to COMPUTE from Graphics. Each time you change one of the GPU’s to COMPUTE, it will ask you to restart the AMD Settings, which will take some time,  but it’s also possible that even if you’ve changed it to Compute,  that the GPU will still display “Graphics” instead of it. To fix this, try to restart your PC and see if the value was stored properly after that.
Despite the reported effectiveness of the beta driver in boosting the performance of Ethereum mining rigs, this will become a non-issue when the Ethereum platform will shift to proof of stake from the existing proof of work protocol.
After you found the optimum Memory clock rate, we will need to try and push the GPU Core clock rate to 150 MHz. That’s important because on the last step we will try to reduce power draw of the GPU by heavy amount, and that’s only possible with 150 MHz on the GPU, basically the closer you will get to 150 MHz you save more power, no need to go over 150 MHz.
SPLASHTOP – If nanopool finds a problem the best way to fix the issue is using remote desktop software to access your rigs. Instead of Splashtop you can use Teamviwer they do the same job. And as your Main GPU is integrated one, the streaming software will not have big impact on the hashrate or stability of the rig.
The part before the -dwal is the same as for the solo ethereum mining described above. The -dwal has the same representation as -ewal, it just is the mining pool of the dual coin. I would recommend to mine ONLY Decred as a dual coin, because it has the highest efficiency of all of them . As described above the Dual coin uses the GPU’s core for mining and not all dual coins give the same results. For RX 5xx cards the best way would be to go with Decred. I use the Supernova decred mining pool. You need to create an account there, and the account name will serve you as a decred mining pool address. This way it gives you one more security improvement, because you don’t show people your address, instead just your account name. On your account you will need to create a worker and give it a name for example: worker1, and leave it’s password as it is (“password”). Now to connect properly to the decred mining pool you would need to put “-dwal supernovaAccountName.supernovaWorkerName”        
The reason a 3GB card is not a good idea is that when mining there is a large file that is stored in memory called the DAG, and this file grows over time. The DAG is already larger than 2GB and if you have a 3GB card then when the DAG becomes more than 3GB you can no longer mine. This can be circumvented with a DAGless miner, but that won’t be covered in this tutorial, and expenses rack up quickly for smaller memory cards.
However, as interest in the project grew, this idea became more controversial. Not everyone involved with Bitcoin Gold likes the idea of an additional founders reward – something Bcash, for example, did not have.
Miner sind auch dafür verantwortlich, dass niemand im Netzwerk eine doppelte Transaktion tätigt oder gegen andere Regeln des Blockchain Protokolls verstößt. Solche Regeln werden vor der Erschaffung einer Blockchain festgelegt. Alle Transaktionen müssen dem zuvor festgelegten Protokoll entsprechen.
The Ethereum Platform and ETH could be impacted by one or more regulatory inquiries or regulatory actions, which could impede or limit the ability of Stiftung Ethereum to continue to develop the Ethereum Platform, or which could impede or limit the ability of a User to use Ethereum Platform or ETH.
You would need to flash your GPU BIOS using Windows. I have specifically not covered this in detail as it’s risky and I do not wish to take responsibility for flashed GPUs. However, there are plenty of sites out there that show you how to do it.
A password will be of you at this stage, and extra care should be taken here. Be sure about your password, write it down if possible and be sure to type it in carefully. Press enter once again after typing in the password and voila! Your new account is created.
Storage Drive: Small and inexpensive is again the name of the game here. You likely don’t want to use a M.2 PCIe graphics card as some boards will disable PCIe slots when a M.2 PCIe SSD is inserted into the board. For that reason we suggest going with something like a low-cost SATA III SSD. The Kingston A400 120GB SATA III SSD at $47.99  or PNY CS1311 120GB SSD at $52.99 are hard to beat. If you don’t care about brand names or how easy it is to RMA if it breaks the DREVO Pro Series 64GB SSD at $39.99 shipped is cheap and will hold an OS.

Leave a Reply

Your email address will not be published. Required fields are marked *