“Ethereum Mining Virus”

“Ethereum Mining Virus”

Before we go changing any values, if you haven’t run your miner at stock settings already for a few minutes to get a decent idea of its baseline performance, now is a good time to do that. Look for output along the lines of “ETH: GPU0 XX.XXX Mh/s” while Claymore’s miner is running. There will be some variance from line to line, but that XX.XXX number is the hash rate for that individual GPU. When you have a good idea of your average hash rate, close the miner—it’s time to start making some changes!
After that scroll all the way down till you see your GPU’s, they are located at the end. Now after you found the GPU’s, select all sensors except “Memory Errors” and HIDE them (right click on the sensors and press “hide”). Ater that, you will have something as in the image below:
Click on Save Your Address and then select the “Keystore File” radio button and then click on “Select Wallet File”, browse to your recently downloaded Keystore File (which starts with “UTC…”) and select it.  
Mit dem sog. Mining wird das virtuelle Geld errechnet. Grundlage dazu ist die sog. Blockchain. Ich verzichte hier auf eine genaue Funktionsbeschreibung, denn das könnt ihr einfach googeln. Interessant daran ist, dass jeder am Mining einer Kryptowährung teilnehmen kann. Während man bei Bitcoin mittlerweile praktisch keine Chance mehr hat mit vertretbarem Aufwand Bitcoins zu schürfen, da es immer schwieriger wird Blöcke zu errechnen, sieht es bei Ethereum aktuell noch anders aus.
Verkauft lieber Schaufeln. Mit Anleitungen, Seminaren, Beratung lässt sich auch ne Menge Geld machen Meine die Tage am Zeitungsstand sowas gesehen zu haben: Werden Sie REICH REICH REICH mit ihrer Zocker-Hardware. Das bringt wieder jede Menge (planlose) Kundschaft. Wie sagt es sich über dem Teich so schön: In einem Goldrausch wirst Du nicht durchs Schürfen reich sondern durch den Verkauf von Schaufeln (und anderen Waren und Dienstleistungen drumherum). Das gilt umso mehr, wenn der Goldrausch sich dem Ende zuneigt und die letzten Nachzügler im Camp eintreffen.
Quotes delayed at least 15 minutes. Market data provided by Interactive Data. ETF and Mutual Fund data provided by Morningstar, Inc. Dow Jones Terms & Conditions: http://www.djindexes.com/mdsidx/html/tandc/indexestandcs.html.
This is pretty much a given. However, I thought I would mention it as it’s always best to start off with a clean installation. If you’re using more than 4 GPUs, then I’d recommend using Windows 10, or you will need to do some tweaks. If you’re going to use Windows 7 or 8, then also install the 6xGPU Mod software. An important fact to remember with fresh installations is that you should disable your computer from ever going to sleep or hibernating.
Note : If you plan to sell your GPUs after their (profitable ?) use, then you should definitely include the popularity of the GPU in your criteria. For example, 8Go-GPUs are said to attract gamers in the second-hand market.
All sales are final. No refunds will be granted unless we fail to ship your order. Defective miners can be repaired for free if they fall under our warranty policy. After the warranty period, machines can be repaired at the cost of parts and labor.
No problem! Hope it helped somebody out, at least. Hard to compete with all the top sponsored posts. If anyone has any questions, let me know! Part 2 is also coming very soon! Just syncing blockchain for ETH now.
Create a tradeable digital token that can be used as a currency, a representation of an asset, a virtual share, a proof of membership or anything at all. These tokens use a standard coin API so your contract will be automatically compatible with any wallet, other contract or exchange also using this standard.
Geth is the program that communicates with the Ethereum Network and acts as the a relay between your computer, its hardware and the rest of the ethereum network computers so if a block is mined by another computer your Geth program will pick it up and then pass on the new information onto your GPU or CPU for mining.
Note, when downloading the Claymore Miner Windows may provide a warning, but if you used Claymore’s download link can you ignore this.  He is a well-respected developer who has been building crypto miners for many years.  
Before we even get to Windows, make sure your mining computer’s BIOS settings are in order. Power on your computer, and press the “delete” key a few times immediately after power on. You should end up in the BIOS configuration area. Do the following, then save & exit:
Want to mine somewhere other than your own computer? MinerGate provides an Admin version of the software that allows mining to a specific minerGate account without allowing access to the miner’s incorporated wallet.
had a quick question on setting up geth – I’ve gotten to step 7 and while syncing it keeps generating the same few lines of text (“imported new block receipts, imported new block headers”, etc.) should this be expected? how long does this usually take to complete?
0.16% hourly 3.84% day $10.00 – $500.00; 0.17% hourly 4.08% day $501.00 – $1 000.00; 0.18% hourly 4.32% day $1 001.00 – $3 000.00; 0.19% hourly 4.56% day $3 001.00 – $5 000.00; 0.21% hourly 5.04% day $5 001.00 – $10 000.00; 0.24% hourly 5.76% day $10 001.
lohnen schon, nur dauert das bis man es wieder drinnen hat bei den derzeitigen Preisen. hätte er z.B. 2 RX 480 für 200€ pro Stk gekauft, wäre das ok, da er die 400€ nach etwas mehr als einem Monat drin hätte, aber nunmehr 1000€ für 2 Stk. würde alleine rund 3 Monate dauern, dann würde er erst Gewinn erzielen, aber dann läuft es halt… Ein Risiko bleibt, das der Preis fallen kann, aber genauso gut kann er auch steigen, das ist halt das ding bei so welchen Investitionen.
I’m going to assume that everyone reading this is capable of installing a fresh copy of Windows. Complete the installation and boot into the Windows desktop before proceeding to the next step. If necessary, also install the LAN/Ethernet driver that came with your motherboard so that you can get online.
After installing this new application, you’ll need to create an account for yourself. You’ll want to make sure that you create as secure a password as you can, but you’re also going to want to make sure that you physically record that password somewhere (writing it down somewhere secure) as you won’t be able to retrieve that password after it has been created.
Well, gpuboss.com helps a lot. Take into account the Bitcoin mining performance shown by Gpuboss for each GPU : it’s not an absolute answer to our question (since Bitcoin neither use Equihash nor Dagger-Hashimoto but SHA-256) yet it’s guiding you in the right direction. Try not to focus on hashrates found on forums : those numbers depend on too many factors (mining software and its parameters, exact GPU version, driver version, overclocking, downclocking, etc). Pay attention to the power consumption in charge. You can get it from tests available on the Internet. If not, use constructors’ indicator called TDP (Thermal Design Power), which may allow you to compare the GPUs you’ve selected.  Then, find the lowest price.
We want to have the latest NVIDIA Drivers installed, so go to NVIDIA driver website, and download the latest version for your GPU’s. After you downloaded and installed the driver, shut down your PC and connect all the other GPU’s. Now after you turn the PC back on wait about 10 minutes for the drivers to be automatically installed on the GPU’s. Don’t do anything in the meantime, you can check if all your GPU’s are installed properly if you see them in Device Manager under Display Adapters.
What we see here is a 2.5 times improvement over the Ethereum hashrate of a GTX 1080. Eventually, this card was tailored to mine Ethereum and maybe one more coin as a secondary. I wonder about the price of those cards.
Could someone help me out here. I’ve got a R280X that should run around 290 h/s on equihash. I runs great guns on Cryptonite 485 h/s but when I start Claymore Zen64 miner it starts out at 275 h/s and then starts to throttle back to 150 h/s. It drops my clock speed in half and I have no control over setting thru MSI afterburner. It mines along but at half the speed 500mhz.
Endoxan und haarausfall. Kam auch überhaupt nicht damit klar. @allIch habe jetzt meinen 2. Ich habe vor vier Jahren fünf Endoxan-Infusionen bekommen und habe in ALPHA 7 Days to Die ist ein Zombie-Survival-Spiel aus der Ego-Perspektive, das auf eine offene Spielwelt setzt und Elemente aus Shooter, Horror, Rollenspiel und
Conversely, if you are up for it, CPU mining can be done. Just type in ‘ETHMINER’ then the enter key to start the process. The building of a DAG is still required in this step after which Geth takes over communication with Ethminer.
Full ASIC-resistance, however, is thought to be impossible: Any mining algorithm could be subject to specialized chips. Like Vertcoin , the Bgold community therefore plans to re-deploy a new proof-of-work algorithm hard fork if it is found that ASIC-chips for Equihash are being produced. (This plan alone, of course, could be a deterrent for any potential ASIC-producer.)
each Motherboard has a FIXED MAX PCI-E support. For example an H81 pro btc has 7, that means you can’t have more than 7 GPU’s connected on that motherboard! (Integrated GPU on the motherboard + 6 GPU = 7 GPU total)
CPU mining can be done possibly the most profitably with dedicated CPU farms. However every(?) personal device has to have a screen, and thus, a GPU. So GPU mining would be inherently more decentralized, because a mining device would also have value as a general-purpose device. Not every turing-complete device is good as a general-purpose device.
The program that we will be using to mine is Claymore’s Dual Miner. The main feature of this miner is that it can mine two cryptocurrencies at the same time on each card, though we will only be doing Ethereum in this guide I recommend siacoin as a currency to dual mine with ETH, especially if you have AMD rx cards.
(6) Setup and run the Miner Script: The Claymore miner comes with many batch scripts to do mining. For simplicity, starting with the Ethereum only mining script, follows the instructions to modify with your Ethereum wallet’s public address.
   Using values higher than 2 allows you also to set custom delay between DAG generation on GPUs, for example, “-gser 5” means same as “-gser 2” and also adds 3sec delay between DAG generation (can be useful for buggy drivers and/or weak PSU).

Leave a Reply

Your email address will not be published. Required fields are marked *